手表装饰用氮化锆薄膜的制备及性能  

Preparation and properties of zirconium nitride thin film for watch decoration

作　　者：刘海华 宋鹏涛 郭新刚 陈世佳 龚翔 罗晨 黄宝渝 LIU Haihua;SONG Pengtao;GUO Xin’gang;CHEN Shijia;GONG Xiang;LUO Chen;HUANG Baoyu(Department of Center Laboratory,Zhuhai Rossini Watch Industry Ltd.,Zhuhai 519085,China;不详)

机构地区：[1]珠海罗西尼表业有限公司实验中心,广东珠海519085

出　　处：《电镀与涂饰》2020年第14期916-920,共5页Electroplating & Finishing

摘　　要：采用离子镀与磁控溅射工艺在316L不锈钢上制备了Cr(Si)/ZrN/Au梯度薄膜。该薄膜呈金黄色,具有优良的结合强度、耐蚀性和耐磨性,是理想的手表用装饰性膜层。其中金层厚度小于10 nm,用金量极少。A Cr(Si)/ZrN/Au gradient thin film was prepared on 316 L stainless steel by ion plating and magnetron sputtering,which had a golden yellow appearance and excellent adhesion strength,corrosion resistance,and abrasion resistance,being able to be used as an ideal decorative film for watches.The content of Au in this thin film was very low due to the thickness of Au layer was less than 10 nm.

关 键 词：不锈钢 氮化锆薄膜 离子镀 磁控溅射 耐蚀性 耐磨性 

分 类 号：TQ153.2[化学工程—电化学工业]