检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:颜世伟 郝佳 李海旭 YAN Shi-wei;HAO Jia;LI Hai-xu(No.92942 Unit of PL A,Beijing 100161,China;CSSC System Engineering Research Institute,Beijing 100036,China)
机构地区:[1]中国人民解放军92942部队,北京100161 [2]中国船舶系统工程研究院,北京100036
出 处:《舰船科学技术》2021年第21期173-178,共6页Ship Science and Technology
摘 要:为提高着舰安全性,舰载机自动着舰由母舰和舰载机协同工作,无需飞行员操纵,同时也降低了舰载机着舰难度。因此在自动着舰工况下,如何实现在复杂海况和气象条件下精确闭环控制,保证舰载机沿理想下滑道和在理想着舰点触舰是全自动着舰必须解决的关键技术。本文通过对舰载机、飞控系统和环境建模,利用仿真方法重点对全自动模式下舰载机着舰点的分布进行研究,为后续确定舰载机理想着舰点和航母如何布置阻拦索提供参考。In order to improve the safety of landing process,the fully automatic landing was coordinated controlled by the aircraft carrier and the aircraft without pilot control,meantime reducing the difficulty and risk.In the case of complex weather conditions,how to achieve closed-loop precise controlling and alone the glide path to touch down ideal landing point was the key technology that must be solved for automatic landing.By modeling the carrier,aircraft,flight control system and environment,this paper research the distribution of the carrier aircraft’s landing points in the fully automatic mode by simulation.The simulation results provide the reference for the design of ideal landing touch-down point and arrangement of arresting cables for the aircraft carrier.
分 类 号:V448[航空宇航科学与技术—飞行器设计]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222