基于MCM技术的小型化频率合成器设计与实现  

Design and Realization of Miniaturized Frequency Synthesizer Based on the Technique of MCM

作　　者：郭鑫 程建斌 GUO Xin;CHENG Jianbin(China Key System&Integrated Circuit Co.,Ltd.,Wuxi 214072,China)

机构地区：[1]中科芯集成电路有限公司,江苏无锡214072

出　　处：《电子与封装》2021年第12期61-64,共4页Electronics & Packaging

摘　　要：小型化是现代电子通信中重要的研究方向,频率合成器的小型化设计更是射频信道小型化的设计重点。基于多芯片组件(Multi-Chip Module,MCM)技术,设计了一款X频段小型化频率合成器,在满足电性能指标的前提下,尽可能减小了模块体积。测试结果显示,该频率合成器在13.4 GHz处相位噪声低于-88 dBc/Hz@10 kHz,尺寸仅为15 mm×15 mm×6 mm,满足设计和系统使用要求。Miniaturization is a crucial research orientation in modern electronic communication,and miniaturized design of frequency synthesizer has been the core design in the miniaturization of radio frequency channel.An X-band miniaturized frequency synthesizer based on the multi-chip module(MCM)technique is designed,with the objective to reduce the volume of modules on the condition that it meets the parameters of electrical characteristics.The test result reveals that the phase noise of the frequency synthesizer is under-88 dBc/Hz@10 kHz at the frequency of 13.4 GHz,with only the size of 15 mm×15 mm×6 mm,satisfying the requirement of design and system usage.

关 键 词：频率合成器 小型化 多芯片组件 

分 类 号：TN742.2[电子电信—电路与系统]