检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:崔光耀 克旭 郭艳军[2] CUI Guangyao;KE Xu;GUO Yanjun(School of Civil Engineering,North China University of Technology,Beijing 100144,China;Sichuan Electric Power Design&Consulting Co.,Ltd,China Power Construction Group,Chengdu 610041,China)
机构地区:[1]北方工业大学土木工程学院,北京100144 [2]中国电建集团四川电力设计咨询有限责任公司,四川成都610041
出 处:《吉首大学学报(自然科学版)》2023年第2期39-46,共8页Journal of Jishou University(Natural Sciences Edition)
基 金:国家自然科学基金资助项目(52178378)。
摘 要:为了提升强震区软弱地层城市综合管廊的抗震性能,以某城市综合管廊工程为研究对象,利用有限差分软件FLAC3D,探讨了不同设置方式的减震层的减震效果.结果表明,相较于无措施工况,设置垫层减震层后,管廊最大沉降减少1.61%,最大、最小主应力分别减小29.75%和4.88%,最大剪切应力减小18.49%,最小安全系数增大15.13%;设置半环减震层后,管廊最大沉降减小1.55%,最大、最小主应力分别减小34.12%和18.06%,最大剪切应力减小31.86%,最小安全系数增大18.33%;设置全环减震层后,管廊最大沉降减小16.92%,最大、最小主应力分别减小61.04%和28.84%,最大剪切应力减小35.78%,最小安全系数增大32.46%.全环减震层的减震性能优于垫层减震层和半环减震层,推荐在软弱地层城市综合管廊采用全环减震层进行抗震设计.To improve the seismic resistance behavior of the soft-stratum of urban utility tunnel in strong earthquake areas,this paper takes the utility tunnel as the research object and studies,the shock absorption effect of the shock absorbing layer with different settings through finite difference software FLAC 3D.The results show that compared with the condition without seismic measures,the maximum settlement of the condition with the bedding shock absorbing layer decreases by 1.61%,the maximum and minimum principal stresses decrease by 29.75%and 4.88%respectively,the maximum shear stress decreases by 18.49%and the minimum safety factor increases by 15.13%;the maximum settlement of the condition with setting a semi-ring shock absorbing layer decreases by 1.55%,the maximum and minimum principal stresses decrease by 34.12%and 18.06%respectively,the maximum shear stress decreases by 31.86%and the minimum safety factor increases by 18.33%;the maximum settlement of setting a full-ring shock absorbing layer decreases by 16.92%,the maximum and minimum principal stresses decrease by 61.04%and 28.84%respectively,the maximum shear stress decreases by 35.78%and the minimum safety factor increases by 32.46%.It can be concluded that the shock absorption effect of setting a full-ring shock absorbing layer is better than the cushion layer and the semi-ring layer.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.127