磁控溅射与电子束蒸发制备Ti薄膜性能的研究  

Study on properties of Ti films prepared by magnetron sputtering and electron beam evaporation

作　　者：李兆营 Li Zhaoying(Vital Optics Technology Co.,Ltd.,Chuzhou 239000,Anhui,China)

机构地区：[1]安徽光智科技有限公司,安徽滁州239000

出　　处：《钢铁钒钛》2023年第2期98-102,共5页Iron Steel Vanadium Titanium

摘　　要：为了研究不同制备方法对薄膜性能的影响,分别利用磁控溅射法和电子束蒸发法在长有500 nm厚的SiO2薄膜的Si(100)晶圆上制备了生长速度为1.0 nm/s,厚度为100 nm的Ti薄膜,并对薄膜的厚度、表面形貌、电阻、反射率及应力进行了测试。相比于电子束蒸发法,磁控溅射法制备的薄膜表面晶粒更加均匀致密,表面缺陷少,粗糙度较小,薄膜具有更低的电阻、应力以及更高的反射率。试验结果表明,磁控溅射法制备的薄膜电性能优于电子束蒸发法。电子束蒸发法制备的薄膜应力具有较大的变化范围,可用于多层膜之间的应力匹配调试。同时,也可以通过减少薄膜表面结构缺陷,减小薄膜表面粗糙度来提高薄膜的性能。Aiming at studying the effects of different preparation methods on the properties,Ti films with a growth rate of 1.0 nm/s and a thickness of 100 nm were prepared on Si(100)wafers with 500 nm thick SiO_(2) films by magnetron sputtering and electron beam evaporation methods respectively.The thickness,surface morphology,resistance,reflectance and stress of Ti films were measured.Compared with electron beam evaporation,Ti films prepared by magnetron sputtering have a more uniform and denser surface with fewer defects and smaller roughness,lower resistance,stress and higher reflectance.The results show that the electrical performance of Ti films prepared by magnetron sputtering are superior to that of electron beam evaporation.The stress of Ti films prepared by electron beam evaporation has a large range of variation,which can be used for the stress matching debugging between multilayer films.The performance of the films can be improved by reducing the surface structural defects and surface roughness.

关 键 词：Ti薄膜 磁控溅射 电子束蒸发 电阻 反射率 应力 

分 类 号：TF823[冶金工程—有色金属冶金] TN305.8[电子电信—物理电子学]