检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:丁磊 王敏 刘荣 DIGN Lei;WANG Min;LIU Rong(Yunnan Aluminum Yongxin Aluminum Industry Co.,Ltd.,Jianshui,Yunnan 654300,China)
机构地区:[1]云南云铝涌鑫铝业有限公司,云南建水654308
出 处:《云南冶金》2024年第3期248-252,共5页Yunnan Metallurgy
摘 要:针对雨水回收供水时水位波动大,存在高位溢池、低位烧泵的问题,研制了恒水位供水系统,通过数学模型建立、SIMULINK仿真分析,将各水池水位和阀门开度信号引入PLC进行PID控制,编写阀门控制程序调节阀门的开度,实现了进出水量的动态平衡,达到雨水回收系统投入自动模式后3 min水位就可稳定在设定值运行、设备故障率为0的效果,可节约用电和检修成本10万元/a。Rainwater recycled water supply has the following problems:because water levels fluctuate wildly,it exists pool overflow at high levels,pumps burning at low levels,we researched the constant level water supply system,the signals of water level of pool and valve opening is introduced into PLC for PID control,adjustment of valve opening can be controlled by valve control programming,it realized the dynamic balance of influent and effluent water quantity,when the rainwater recycle system put into automation operation model after 3 min,the water level can be stabled at the setting value,the equipment failure rate is zero,the electricity and maintenance cost can be saved by¥ten thousand yuan per year.
关 键 词:雨水回收 PID控制 水位控制 PLC 控制模型 SIMULINK
分 类 号:TV674[水利工程—水利水电工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.7