自由曲面的自适应跟踪测量方法研究  

Research on adaptive tracing measurement methodology for freeform surface

作　　者：谢金[1] 王文[1] 鞠华[1] 庞媛媛[1] 陈子辰[1] 

机构地区：[1]浙江大学现代制造工程研究所,浙江杭州310027

出　　处：《工程设计学报》2003年第2期80-83,共4页Chinese Journal of Engineering Design

基　　金：浙江省科技计划重点项目(2003C21031);浙江大学机械与能源学院院长基金项目.

摘　　要：激光传感器在测量自由曲面中有着非接触、精度高等优点,其应用越来越广泛.但是激光测头的线性测量范围较小,难以测量起伏变化较大的曲面.针对这一问题,提出了激光测头的跟踪测量方法,使激光测头随曲面的高度变化作上下调整,从而可以测量任一表面起伏的曲面,且能根据当前曲面的曲率大小自适应选择跟踪方式,实现测点的自适应分布.最后,对一个工件分别进行了等间距测量和自适应跟踪测量,并对两种方法的测量结果做了比较,证明了自适应跟踪测量方法的可行性和有效性,为自由曲面的测量提供了一种新的方法.Laser probe has the advantages ofnon- contact and high precision in free form measure- ment and it is used frequently.But laser probe has a small linear measurement range,which makes itdifficultto measure the surface with a high fluctuation.To solve this puzzle,this paper describes a tracing measurement methodology for laser probe.Through the methodology,laser probe can measure any height surface by adjudging its position up and down,and can adaptively choose tracing methods according to the curvature of surface.Measurement points can also dis- tribute adaptively. Finally,a workpiece is measured through both constant step method and adaptive tracing method.The feasibility and efficiency are testified by the comparison of the re- sults of the two methods.Adaptive tracing is a novel method for freeform surface measurement.

关 键 词：自由曲面 跟踪测量 自适应 激光测头 激光传感器 非接触式测量 计算机视觉 

分 类 号：TG84[金属学及工艺—公差测量技术] TN249[电子电信—物理电子学]