检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:赵林[1] 李侃社[1] 吴一惠[2] 冯仁东[2] 刘玉才[2]
机构地区:[1]四川大学高分子研究所,四川成都610065 [2]江汉石油学院石油与材料工程学院,湖北荆州434023
出 处:《西安石油学院学报(自然科学版)》2003年第3期58-60,共3页Journal of Xi'an Petroleum Institute(Natural Science Edition)
摘 要:将磨盘形力化学反应器应用于部分水解聚丙酰胺 ( HPAM)的改性 ,通过碾磨次数的变化得到了不同碾磨次数的部分水解聚丙烯酰胺样品 ;实验研究了碾磨过程中 HPAM特性黏数及表观黏度的变化 ;考查了剪切速率及老化时间对碾磨后 HPAM溶液黏度的影响 .结果表明 :碾磨使HPAM特性黏数及表观黏度均有不同程度的下降 。Partially hydrolyzed polyacrylamide (HPAM) is modified by pan-milling. HPAM samples of different milling cycles are obtained. The relationships are studied between intrinsic viscosity and apparent viscosity of the aqueous solution of each sample and the number of milling cycles, and the effects of shear rate and aging time on the apparent viscosity are also discussed. It is shown that (1) the intrinsicviscosity and the apparent viscosity of the aqueous solution of every sample decrease as the number of milling cycles increasing; (2) the apparent viscosity decreases with the increase of shear rate when millingcycle number is less, and it increases slightly when milling cycle number is greater, (3) the apparent viscosity of every sample solution decreases with the increase of the aging time after milling.
关 键 词:磨盘碾磨 力化学 部分水解聚丙烯酰胺溶液 黏度
分 类 号:TQ326.4[化学工程—合成树脂塑料工业]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.200