基于5G通信的硅基IPD滤波器设计与仿真  

Design and simulation of silicon based IPD filter based on 5G communication

作　　者：彭刚彬 周云燕[1,2,3] 曹立强 PENG Gang-bin;ZHOU Yun-yan;CAO Li-qiang(Institute of Microelectronics,Chinese Academy of Sciences,Beijing 100029,China;Unirersity of Chinese Academy of Sciences,Beijing 100049,China;National Center for Advanced Packaging Co,Ltd.,Wuxi 214135,China)

机构地区：[1]中国科学院微电子研究所,北京100029 [2]中国科学院大学,北京100049 [3]华进半导体封装先导技术研发中心有限公司,江苏无锡214135

出　　处：《微电子学与计算机》2019年第5期10-13,18,共5页Microelectronics & Computer

基　　金：国家科技重大专项(2014ZX02501)

摘　　要：集成无源器件(IPD)因其集成度高而被广泛应用于系统级封装(SIP)和现代无线通信系统中.同时为达到系统设计中低功耗、低成本和小型化的要求,本文设计了基于5G通信的IPD滤波器.利用电子设计自动化软件(ADS)设计滤波器原理图,并结合全波仿真工具(HFSS)对电容、电感、互感以及整体滤波器结构进行仿真.系统仿真结果表明,滤波器在3.4～3.6 GHz带宽内损耗为1.08 dB,带外抑制达到-30 dB.Thin integrated passive devices(IPD)are widely used in System in Package(SIP)and modern wireless communication systems because of their high integration.At the same time,in order to achieve the requirements of low power consumption,low cost and small and medium size,this paper designs a IPD filter based on 5 G communication.The electronic design automation software(ADS)is used to design the filter schematic diagram,and the full wave simulation tool(HFSS)is used to simulate the structure of capacitance,inductance,mutual inductance and overall filter.The simulation results show that the insertion lossof pass-band is 1.08 dB and the insertion loss of out-band is 30 dB.

关 键 词：IPD 5G通信 滤波器 硅基 

分 类 号：TN713[电子电信—电路与系统] TN929.5