国家自然科学基金(50771041)

作品数:12被引量:27H指数:3
导出分析报告
相关作者:傅恒志郭景杰苏彦庆刘江平骆良顺更多>>
相关机构:哈尔滨工业大学更多>>
相关期刊:《铸造》《China Foundry》《Transactions of Nonferrous Metals Society of China》《稀有金属材料与工程》更多>>
相关主题:TIAL3GROWTHTI-46ALLOYSSOLIDIFIED更多>>
相关领域:金属学及工艺一般工业技术建筑科学更多>>
-

检索结果分析

结果分析中...
条 记 录,以下是1-10
视图:
排序:
箔冶金法制备Ti-Al-W-Si合金板材被引量:1
《稀有金属材料与工程》2012年第S2期316-319,共4页刘江平 苏彦庆 陈晖 骆良顺 徐严谨 郭景杰 傅恒志 
国家自然科学基金(50771041)
用热压逐层叠置的TiWSi合金箔与Al箔的方法制备了Ti-46Al-4W-Si的合金板材。热压工艺为645℃/15h+900℃/30h+1370℃/2h。利用扫描电子显微镜(SEM)和X射线衍射仪(XRD)对板材的组织和成分进行了分析。板材呈近全片层组织。由于Kirkenall...
关键词:热压 箔冶金 钛铝 板材 
Effect of thermal stabilization on microstructure and mechanical property of directionally solidified Ti-46Al-0.5W-0.5Si alloy被引量:1
《Transactions of Nonferrous Metals Society of China》2012年第5期1073-1080,共8页樊江磊 李新中 苏彦庆 陈瑞润 郭景杰 傅恒志 
Projects (50801019, 51071062, 50771041) supported by the National Natural Science Foundation of China;Project (2011CB605504) supported by the National Basic Research Program of China
Effect of thermal stabilization on the microstructure and mechanical property of directionally solidified Ti-46Al-0.5W-0.5Si (mole fraction, %) alloy was investigated. The specimens were thermal stabilized for diffe...
关键词:INTERMETALLICS TiAl-based alloy crystal growth microstructure evolution mechanical properties 
Fabrication of wavy γ-TiAl based sheet with foil metallurgy被引量:3
《Transactions of Nonferrous Metals Society of China》2012年第1期72-77,共6页LIU Jiang-ping SU Yan-qing LUO Liang-shun CHEN Hui XU Yan-jin GUO Jing-jie FU Heng-zhi 
Project (50771041) supported by the National Natural Science Foundation of China;Project (05-0350) supported by the New Century Excellent Talents in University, China
A 0.7 mm-thick wavy γ-TiAl sheet with fully lamellar microstructure was fabricated by hot pressing Ti/Al alternate foils with heat treatment of 640 °C, 15 h+850 °C, 35 h+1350 °C, 2 h. The intermetallic compounds...
关键词:solid state reaction phase transformation titanium aluminides foil metallurgy 
Thermo-Calc and T-f_S-C_L coupling based method to determine solidification paths of alloys solidified under condition of Biot≤0.1被引量:1
《Transactions of Nonferrous Metals Society of China》2012年第1期139-146,共8页ZHAO Guang-wei LI Xin-zhong XU Da-ming GUO Jing-jie FU Heng-zhi DU Yong HE Yue-hui 
Projects (2008112042) supported by the Open Project of State Key Laboratory of Powder Metallurgy of Central South University, China;Projects (50771041, 50801019) supported by the National Natural Science Foundation of China;Project (2011CB610406) supported by the National Basic Research Program of China
A binary continuum model for dendritic solidification transport phenomena and corresponding numerical algorithm for the strong nonlinear coupling of T-fS-CL were extended to multicomponent alloys solidified under cond...
关键词:THERMO-CALC solidification transport solidification paths MICROSEGREGATION 
Ti/Al固态扩散偶中初生相的选择(英文)被引量:6
《稀有金属材料与工程》2011年第5期753-756,共4页刘江平 苏彦庆 徐严谨 骆良顺 郭景杰 傅恒志 
National Natural Science Foundation of China(50771041);New Century Excellent Talents in University(05-0350)
用热压法制备Ti/Al扩散偶,并在525,550,575,600℃进行热处理。结果表明:当Al未完全消耗时,TiAl3是Ti/Al界面处唯一的产物,TiAl3向Al箔一侧长大,Ti箔中没有检测到Al原子的存在。从固溶体的溶解度极限,Al、Ti和TiAl3的晶格失配度,以及新...
关键词:TIAL3 相选择 界面能 长大动力学 
Numerical simulation of intermediate phase growth in Ti/Al alternate foils被引量:5
《Transactions of Nonferrous Metals Society of China》2011年第3期598-603,共6页刘江平 骆良顺 苏彦庆 徐严谨 李新中 陈瑞润 郭景杰 傅恒志 
Project (50771041) supported by the National Natural Science Foundation of China;Project (05-0350) supported by the New Century Excellent Talents in University, China
To investigate the diffusion reaction between Ti/Al solid diffusion couple, Ti/Al alternate foils formed by hot pressing were annealed at 525, 550, 575 and 600 °C for time ranging from 1 to 40 h. The experimental res...
关键词:hot pressing diffusion couple TIAL3 finite difference method numerical simulation 
γ-TiAl基合金薄板制备技术被引量:1
《特种铸造及有色合金》2010年第2期127-130,共4页刘江平 苏彦庆 郭景杰 骆良顺 傅恒志 
国家自然科学基金资助项目(50771041);新世纪优秀人才支持计划资助项目(NCET05-0350)
综述了4种制备TiAl基合金薄板的方法。特殊轧制法较为成熟但对工艺要求严格,箔冶金法和物理气相沉积法制备的板材杂质含量低,铸轧法工艺简单但组织欠均匀。介绍了合金元素及热处理工艺对TiAl基合金薄板组织的影响。论述了上述制备技术...
关键词:TIAL基合金 板材 显微组织 力学性能 
Phase-field simulation of lamellar growth for a binary eutectic alloy被引量:1
《Transactions of Nonferrous Metals Society of China》2010年第2期302-307,共6页李新中 刘冬梅 孙涛 苏彦庆 郭景杰 傅恒志 
Projects(50771041,50801019)supported by the National Natural Science Foundation of China;Project(20080430909)supported by China Postdoctoral Science Foundation;Project(HITQNJS.2008.018)supported by Development Program for Outstanding Young Teachers in Harbin Institute of Technology,China
Using general multi-phase-field model,detailed microstructures corresponding to different initial lamellar sets were simulated in a binary eutectic alloy with an asymmetric phase diagram.The simulation results show th...
关键词:phase-field simulation microstructure eutectic lamella 
Effects of hydrogenation on ambient deformation behaviors of Ti-45Al alloy
《Transactions of Nonferrous Metals Society of China》2009年第S02期403-408,共6页SU Yan-qing LIU Xin-wang ZHAO Long WANG Liang GUO Jing-jie FU Heng-zhi 
Project(50771041)supported by the National Natural Science Foundation of China。
Effects of hydrogenation on ambient deformation behaviors of Ti-45Al alloy were studied.The stress-strain curves demonstrate that the plastic deformation of the hydrogenated alloys becomes more remarkable than that of...
关键词:hydrogen TiAl alloy HYDRIDE DISLOCATION fracture 
合金元素挥发损失量计算动力学模型被引量:4
《铸造》2009年第4期373-375,共3页张正贺 苏彦庆 陈大洲 郭景杰 傅恒志 
国家自然科学基金项目(50771041);教育部新世纪优秀人才项目05-0350)
建立了计算熔体中组元挥发损失量随保温时间变化的模型,该模型耦合了挥发过程中熔体成分、组元活度、组元蒸汽压、挥发损失速率等变量。利用该模型计算得到了1373K时Cu-Zn熔体挥发过程中熔体成分及挥发速率的变化,同时得到了熔体质量损...
关键词:质量挥发速率 成分变化 挥发损失 
检索报告 对象比较 聚类工具 使用帮助 返回顶部