国家重点基础研究发展计划(2012CB619503)

作品数:32被引量:210H指数:7
导出分析报告
相关作者:潘清林郑子樵尹志民马朝利罗先甫更多>>
相关机构:中南大学北京航空航天大学北京工业大学上海飞机设计研究院更多>>
相关期刊:《粉末冶金材料科学与工程》《材料导报》《电子显微学报》《中国有色金属学报》更多>>
相关主题:ZRSC力学性能ALLOYAL-CU-LI合金更多>>
相关领域:金属学及工艺一般工业技术理学建筑科学更多>>
-

检索结果分析

结果分析中...
条 记 录,以下是1-10
视图:
排序:
Microstructures and grain refinement performance of Al-Ti-B-C grain refiner via powder metallurgy被引量:1
《Rare Metals》2022年第7期2357-2362,共6页Cong Xu Wen-Long Xiao Shi-Zhen Wen Yue-Jun Zhen Chao-Li Ma 
financially supported by the National Basic Research Program of China (No. 2012CB619503);the National High Technology Research and Development Program of China (No. 2013AA031001);the International Science & Technology Cooperation Program of China (No. 2012DFA50630)
The Al-5Ti-0.5B-0.5C grain refiner was pre-pared by powder metallurgy(PM).Microstructures of the grain refiner and its grain refinement performance in commercially pure aluminum(Al)were investigated by X-ray diffracti...
关键词:Al–Ti–B–C Powder metallurgy MICROSTRUCTURE Grain refinement 
新型铝合金板材双面焊接头性能研究
《稀有金属材料与工程》2017年第9期2607-2612,共6页孙建通 李晓延 张亮 兖文涛 杨秦政 
国家"973"项目资助(2012CB619503)
针对一种新型Al-Zn-Mg-Cu合金进行双面MIG焊接,观察接头部位组织形貌,并进行显微硬度测试,然后基于visual-weld进行温度场的仿真计算,建立接头部位温度场与组织形貌和硬度的关系。然后采用X射线法对焊件进行残余应力测试。结果表明,焊...
关键词:双面MIG焊接 AL-ZN-MG-CU合金 残余应力 微观形貌 显微硬度 
Microstructural evolution of new type Al-Zn-Mg-Cu alloy with Er and Zr additions during homogenization被引量:14
《Transactions of Nonferrous Metals Society of China》2017年第7期1476-1482,共7页Hao WU Sheng-ping WEN Jun-tai LU Zhen-peng MI Xian-long ZENG Hui HUANG Zuo-ren NIE 
Project(2012CB619503) supported by the National Basic Research Program of China;Project(51201003) supported by the National Natural Science Foundation of China;Project(2142007) supported by Natural Science Foundation of Beijing,China
A comprehensive study on the microstructural evolution of a new type Al-Zn-Mg-Cu-Er-Zr alloy duringhomogenization was conducted by optical microscope,scanning electron microscope,transmission electron microscopy and X...
关键词:Al-Zn-Mg-Cu-Er-Zr alloy HOMOGENIZATION microstructural evolution primary phases Al3(Er Zr) particles 
Effect of aging time on precipitation behavior, mechanical and corrosion properties of a novel Al-Zn-Mg-Sc-Zr alloy被引量:7
《Transactions of Nonferrous Metals Society of China》2016年第9期2263-2275,共13页李波 潘清林 陈从平 尹志民 
Project(2012CB619503)supported by the National Basic Research Program of China;Projects(51475266,51005134)supported by the National Natural Science Foundation of China
The precipitation behavior, mechanical properties and corrosion resistance of a novel Al-Zn-Mg-Sc-Zr alloy aged at different time were studied by optical microscopy(OM), scanning electron microscopy(SEM), transmis...
关键词:aluminum alloy heat treatment precipitation behavior Al3(Sc Zr) particles electrochemical impedance spectroscopy 
镍基单晶高温合金的拉伸断裂行为被引量:8
《材料导报》2016年第12期76-80,89,共6页武丹 田礼熙 马朝利 史一宁 
国家973项目(2012CB619503)
对[001]、[011]和[111]取向的镍基单晶高温合金的不同取向的弹性模量及硬度做了表征,并分析了[011]和[111]取向的单晶在室温和1070℃的拉伸断口形貌。研究结果表明:合金的弹性模量及拉伸断裂存在各向异性。室温下,[011]取向试样拉伸断...
关键词:镍基单晶高温合金 各向异性 拉伸断裂 形貌 
含铒铝合金显微组织对疲劳裂纹扩展的影响被引量:3
《稀有金属材料与工程》2016年第4期1035-1039,共5页雷欣 聂祚仁 黄晖 
国家"973"计划(2012CB619503)
对含铒铝合金板材进行了不同的热处理,分析了各板材的显微组织对疲劳裂纹扩展和力学性能的影响。结果表明:晶粒的长/径比越小,板材的疲劳裂纹扩展速率越慢;且随着疲劳裂纹扩展速率的降低,裂纹宽度增加且裂纹路径曲折;稀土元素Er的加入,...
关键词:疲劳裂纹扩展  铝合金 
Al-Mg-Sc-Zr合金冷轧板材的超塑性变形行为被引量:9
《中国有色金属学报》2016年第2期280-287,共8页孙雪 潘清林 李梦佳 史运嘉 严杰 
国家重点基础研究发展计划资助项目(2012CB619503)~~
在温度450~520℃和1.67×10^(-3)~1.00×10^(-1)s^(-1)。初始应变速率条件下对Al-Mg-Sc-Zr合金冷轧板材进行拉伸实验,研究该合金的超塑性流变行为,探讨其超塑性变形机理。结果表明:随着变形温度的升高,伸长率先增加后减小,在500℃和初...
关键词:AL-MG-SC-ZR合金 冷轧 超塑性 变形 
双级时效对含Sc的Al-Zn-Mg-Zr合金组织与性能的影响被引量:6
《中南大学学报(自然科学版)》2015年第11期4034-4043,共10页黄星 潘清林 李波 史运嘉 黄志其 刘志铭 
国家重点基础研究规划(973计划)项目(2012CB619503);佛山市科技创新专项(2013AH100055)~~
通过慢应变速率拉伸实验(SSR_T)、晶间腐蚀试验、剥落腐蚀实验、室温力学性能测试、电导率测试、维氏硬度测量和透射电子显微分析等手段对2.5 mm厚Al-5.4Zn-2.0Mg-0.25Sc-0.1Zr合金板材在双级时效下的抗应力腐蚀性能(SCC)、抗晶间腐蚀性...
关键词:Al-Zn-Mg-Zr合金 双级时效 力学性能 腐蚀性能 显微组织 
Microstructural evolution during homogenization of DC cast 7085 aluminum alloy被引量:2
《Transactions of Nonferrous Metals Society of China》2015年第11期3560-3568,共9页史运嘉 潘清林 李梦佳 刘志铭 黄志其 
Project(2012CB619503)supported by the National Basic Research Program of China;Project(2013AH100055)supported by the Special Foundation for Science and Technology Innovation of Foshan,China
The microstructural evolution of a DC cast 7085 alloy during homogenization treatment was investigated by optical microscopy, scanning electron microscopy, energy dispersive X-ray spectrometry (EDS), differential scan...
关键词:7085 aluminum alloy homogenization treatment microstructural evolution intermetallic phase 
Through-thickness inhomogeneity of localized corrosion in 7050-T7451 Al alloy thick plate被引量:6
《Journal of Central South University》2015年第7期2423-2434,共12页丰雷 潘清林 韦莉莉 黄志其 刘志铭 
Project(2012CB619503)supported by the National Basic Research Program of China;Project(2013AH100055)supported by the Foshan Civic Technological Innovation Foundation,China
The through-thickness corrosion inhomogeneity of 7050-T7451 Al alloy thick plate was studied using immersion tests, potentiodynamic polarization, electrochemical impedance spectroscopy(EIS), slow strain rate testing(S...
关键词:aluminium polarization electrochemical impedance spectroscopy(EIS) intergranular corrosion exfoliation corrosion stress corrosion 
检索报告 对象比较 聚类工具 使用帮助 返回顶部