Projects (2007CB613701,2007CB613702) supported by the National Basic Research Program of China;Projects (50974037,50904018) supported by the National Natural Science Foundation of China;Project (NCET-08-0098) supported by the Program for New Century Excellent Talents in University of China
Ultrasound with different intensities was applied to treating AZ80 alloy melt to improve its solidification structure.The average grain size of the alloy could be decreased from 303 to 148 μm after the ultrasound wit...
supported by the Major State Basic Research Development Program of China (Nos. 2007CB613701 and 2007CB613702);the National Natural Science Foundation of China (Nos. 50904018, 51004032 and 50974037);the Program for New Century Excellent Talents in Chinese Universities (No. NCET-08-0098);the Fundamental Research Funds for the Central Universities of China (Nos. N090409002 and N090209002);the China Postdoctoral Science Foundation (No. 20100471468)
AZ31 alloy billets of 200 mm in diameter were produced by three different processes of conventional direct chill (DC) casting, low-frequency electromagnetic casting (LFEC) and low-frequency electromagnetic vibrati...
Project(2005CB623707) supported by the National Basic Research Program of China; Projects(2007CB613701 and 2007CB613702) supported by the National Key Basic Research Program of China;Projects(50974037,51004032 and 50904018) supported by the National Natural Science Foundation of China;Project(NCET-08-0098) supported by the New Century Excellent Talents in University,Ministry of Education,China;Project(20100471468) supported by China Postdoctoral Science Foundation
The working principle of LFEC(Low frequency electromagnetic casting) process developed in Northeastern University, China was introduced and the metallurgical results of LFEC were discussed according to the casting p...
Projects(2007CB613701; 2007CB613702) supported by the National Basic Research Program of China;Project(NCET-08-0098) supported by the Program for New Century Excellent Talents in University;Project(50974037) supported by the National Natural Science Foundation of China;Project(90209002) supported by the Special Fund for Basic Scientific Research of Central Colleges in China
The solidification microstructures and hardness of Mg-2%Zn (mass fraction) based alloys with addition of 0.4%Ce, 0.4%Gd, 0.4%Y or 0.4%Nd (mass fraction) were investigated, and the effects of the rare earth elements on...
Projects(2007CB613701, 2007CB613702) supported by the National Basic Research Program of China;Projects(50974037, 50904018) supported by the National Natural Science Foundation of China;Project(NCET-08-0098) supported by New Century Excellent Talents in Chinese University;Project(N90209002) supported by the Special Foundation for Basic Scientific Research of Central Colleges
The effects of low frequency electromagnetic (LFEC) field and ultrasonic (US) field on the microstructures, macrosegregation of alloying elements and the mechanical properties of DC cast AZ80 alloy were studied. The r...
Projects(2007CB613701,2007CB613702)supported by the National Basic Research Program of China;Projects(50974037,50904018)supported by the National Natural Science Foundation of China;Project(NCET-08-0098)supported by New Century Excellent Talents in University of China;Projects(N09040902,N090209002)supported by the Special Foundation for Basic Scientific Research of Central Colleges
Under the high-intensity ultrasonic field,AZ80 magnesium alloy was semi-continuously cast.The effects of ultrasonic intensity on the as-cast microstructures and mechanical properties were investigated.The results show...
Projects(2007CB613701,2007CB613702)supported by the National Basic Research Program of China;Projects(50974037,50904018)supported by the National Natural Science Foundation of China;Project(NCET-08-0098)supported by the Program for New Century Excellent Talents in University of China
It was attempted to enhance and accelerate the separation of oxidation inclusions from magnesium alloy melt by virtue of ultrasonic agglomeration technology.In order to investigate the feasibility and effectiveness of...