国家自然科学基金(50974038)

作品数:20被引量:104H指数:5
导出分析报告
相关作者:管仁国赵占勇温景林曹富荣钞润泽更多>>
相关机构:东北大学广州有色金属研究院大连大学钢铁研究总院更多>>
相关期刊:《东北大学学报(自然科学版)》《有色矿冶》《International Journal of Minerals,Metallurgy and Materials》《Transactions of Nonferrous Metals Society of China》更多>>
相关主题:半固态倾斜板SEMISOLID晶粒细化EXTRUSION更多>>
相关领域:金属学及工艺一般工业技术化学工程理学更多>>
-

检索结果分析

结果分析中...
条 记 录,以下是1-10
视图:
排序:
基于电磁场与流场耦合的电沉积加工过程仿真被引量:4
《中国有色金属学报》2013年第1期219-228,共10页吴蒙华 刘新功 王元刚 贾卫平 
国家自然科学基金重点基金资助项目(51034002);国家自然科学基金面上资助项目(50974038);国家自然科学基金资助项目(50975034);教育部新世纪优秀人才支持计划资助项目(NCET-08-0097);辽宁省科技计划资助项目(2010223006)
在电沉积过程中运用COMSOL Multiphysics建立电磁场、流场的数学模型,将有限元和有限差分相结合进行电磁场和流场的耦合模拟分析,研究磁场对流场、电流密度分布、镀层表面形貌、晶粒及SiC含量的影响规律,并进行预测与验证。结果表明:施...
关键词:磁场 流场 耦合 电沉积 数值分析 
Force analysis and experimental study of pure aluminum and Al-5%Ti-1%B alloy continuous expansion extrusion forming process被引量:9
《Transactions of Nonferrous Metals Society of China》2013年第1期201-207,共7页曹富荣 温景林 丁桦 王昭东 李英龙 管仁国 侯辉 
Projects(51034002,50974038,50274020) supported by the National Natural Science Foundation of China
The deformation zone of CONFORM extrusion was divided into primary gripping zone,gripping zone,conical expansion chamber zone,cylindrical zone and sizing zone of die,and corresponding force equilibrium equations were ...
关键词:ALUMINUM aluminum alloy continuous extrusion expansion chamber resistance to deformation 
Microstructure evolution and solidification behaviors of A2017 alloy during cooling/stirring and rolling process被引量:1
《Transactions of Nonferrous Metals Society of China》2012年第12期2871-2876,共6页管仁国 赵占勇 钞润泽 冯振仙 刘春明 
Project (51222405) supported by the National Science Foundation of Outstanding Young Scholars of China;Project (50974038) supported by the National Natural Science Foundation of China;Project (132002) supported by the Fok Ying Tong Education Foundation, China;Project (2011CB610405) supported by the National Basic Research Program of China
A novel semisolid rheo-rolling process of A2017 alloy was achieved by combining the shape rolling mill with the vibrating sloping plate device. The microstructure evolution and solidification behaviors during the proc...
关键词:A2017 alloy SEMISOLID sloping plate ROLLING microstructure microstructure evolution SOLIDIFICATION 
冷却倾斜板熔体处理过程边界层分布及流动传热的理论研究被引量:3
《物理学报》2012年第20期367-375,共9页管仁国 赵占勇 黄红乾 连超 钞润泽 刘春明 
国家优秀青年科学基金(批准号:51222405);国家自然科学基金重点项目(批准号:51034002);国家自然科学基金(批准号:50974038);霍英东基金会青年教师基金(批准号:132002);国家重点基础研究发展计划(批准号:201 1CB610405)资助的课题~~
针对倾斜板熔体处理晶粒细化与半固态成形原理,研究了倾斜板熔体处理过程边界层分布,建立了熔体传热和冷却速率的计算模型.计算结果表明,随着斜板倾角和熔体初始流动速度的增大,熔体在倾斜板上从层流向紊流的转变时间减少;温度边界层厚...
关键词:半固态 晶粒细化 倾斜板 冷却速率 
Simulation of temperature field and metal flow during continuous semisolid extending extrusion process of 6201 alloy tube被引量:3
《Transactions of Nonferrous Metals Society of China》2012年第5期1182-1189,共8页管仁国 赵占勇 钞润泽 连超 温景林 
Projects (51034002, 50974038) supported by the National Natural Science Foundation of China;Project (132002) supported by the Fok Ying Tong Education Foundation;Project (2011CB610405) supported by National Basic Research Program of China
A continuous semisolid extending extrusion (CSEP) method was proposed. Temperature field and metal flow during continuous semisolid extending extrusion process of 6201 alloy tube were studied. During the process, th...
关键词:6201 aluminum alloy SEMISOLID rheoforming extrusion EXTENDING TUBE temperature 
Heat transfer and grain refining mechanism during melt treatment by cooling sloping plate被引量:1
《Acta Metallurgica Sinica(English Letters)》2012年第4期320-328,共9页Renguo GUAN Zhanyong ZHAO Runze CHAO Hongqian HUANG Chunming LIU 
financially supported by the National Natural Science Foundation of China (Nos. 51034002 and 50974038);the Fok Ying Tong Education Foundation (No. 132002);National Basic Research Program of China (973 program)(No.2011CB610405)
Heat transfer of flow melt and grain refining mechanism during melt treatment by the cooling sloping plate were investigated. The results show that the cooling sloping plate can refine not only grains of alloys but al...
关键词:Grain refining NUCLEATION Cooling rate Sloping plate Temper-ature boundary layer 
倾斜板振动熔体处理技术研究与应用进展被引量:14
《特种铸造及有色合金》2012年第3期230-237,共8页管仁国 赵占勇 钞润泽 温景林 
国家自然科学基金重点基金资助项目(51034002);国家自然科学基金资助项目(50974038);教育部新世纪优秀人才支持计划资助项目(NCET-08-0097)
论述了一种金属组织细化与制备半固态金属浆料的熔体处理方法,总结了近年来的研究与应用进展。倾斜板振动技术可以显著细化金属坯料组织,使纯铝的细化晶粒度很容易达到1级细化标准,该技术对过共晶Al-Si合金中初晶Si与共晶Si也具有较好...
关键词:熔体处理 晶粒细化 组织 半固态 成形 
波浪形振动倾斜板半连续铸造半固态AZ91D镁合金被引量:2
《东北大学学报(自然科学版)》2012年第3期381-384,共4页管仁国 赵占勇 戴春光 刘春明 
国家自然科学基金重点资助项目(51034002);国家自然科学基金资助项目(50974038);国家重点基础研究发展计划项目(2011CB610405)
将自制的波浪形倾斜板振动装置与半连续铸造机结合,制备了AZ91D镁合金铸锭.分析了不同工艺条件对合金组织的影响.结果表明,在一定范围内,随着倾斜板长度增加,合金受到冷却剪切作用的时间增长,组织得到细化;振动作用可以提高形核率,细化...
关键词:振动 波浪形倾斜板 半连续铸造 AZ91D镁合金 组织 
Mathematic model of solid fraction during rheo-casting by the cooling sloping plate process被引量:2
《Acta Metallurgica Sinica(English Letters)》2012年第1期81-88,共8页Renguo GUAN Zhanyong ZHAO Hongqian HUANG Qiusheng ZHANG Chunming LIU 
supported by the National Natural Science Foundation of China (Nos.51034002 and 50974038);National Program for Fundamental Research and Development of China (No.2011CB610405)
A mathematic model of the solid fraction during rheo-casting by the cooling sloping plate process was established, and the effects of the process parameters on the solid fraction were analyzed. The calculation results...
关键词:Sloping plate Rheo-casting Mathematic model Solid fraction PARAMETER 
二次加热过程中半固态AZ31镁合金的显微组织演变被引量:22
《中国有色金属学报》2012年第1期7-14,共8页曹富荣 管仁国 陈礼清 赵占勇 任勇 
国家自然科学基金重点基金资助项目(51034002);国家自然科学基金面上资助项目(50974038);教育部新世纪优秀人才支持计划资助项目(NCET-08-0097)
利用波浪形倾斜板振动技术制备AZ31镁合金半固态坯料,获得较为理想的球形或近球形晶粒组织。结果表明:随二次加热温度的升高和保温时间的延长,半固态组织中的液相体积分数增大,固相逐渐长大并球化;AZ31镁合金580℃和610℃时二次加热组...
关键词:AZ31镁合金 半固态 倾斜板 二次加热 显微组织 
检索报告 对象比较 聚类工具 使用帮助 返回顶部