云南高校图书馆联盟文献共享服务平台- 国家自然科学基金(50734002)

国家自然科学基金(50734002): 作品数：54被引量：269H指数：9; 导出分析报告; 相关作者：刘振宇王国栋江来珠王月香刘海涛更多>>; 相关机构：东北大学宝钢集团中央研究院宝山钢铁股份有限公司中国科学院金属研究所更多>>; 相关期刊：《钢铁研究》《塑性工程学报》《材料热处理学报》《Acta Metallurgica Sinica(English Letters)》更多>>; 相关主题：铁素体不锈钢织构显微组织双相不锈钢成形性更多>>; 相关领域：金属学及工艺一般工业技术自动化与计算机技术电子电信更多>>

Nominal friction coefficient in spread formulas based on lead rolling experiments: 《Transactions of Nonferrous Metals Society of China》2015年第8期2693-2700,共8页王鸿雨胡玉昆高锋赵德文张殿华; Projects(51074052,50734002)supported by the National Natural Science Foundation of China; Friction coefficients in spread formulas were studied under low width-to-thickness ratio. The effects of all the factors on friction were considered as different roughness of surfaces. After lead rolling experiments i...; 关键词：SPREAD ROLLING friction coefficient FITTING SELF-LEARNING

Simplified Weighted Velocity Field for Prediction of Hot Strip Rolling Force by Taking into Account Flattening of Rolls: 《Journal of Iron and Steel Research International》2014年第7期637-643,共7页Dian-hua ZHANG Jian-zhao CAO Jiu-jing XU Wen PENG De-wen ZHAO; Item Sponsored by National Natural Science Foundation of China(51074052,50734002); The weighted velocity field was simplified for analysis of hot strip rolling. Using the field and GM （geometric midline） yield criterion, the deformation power, friction power and shear power were obtained respectiv...; 关键词：hot strip rolling rolling force simplified weighted velocity field GM yield criterion elastic flattening analytical solution

Analysis of Hot Tandem Rolling Force with Logarithmic Velocity Field and EA Yield Criterion被引量：2: 《Journal of Iron and Steel Research International》2014年第3期295-299,共5页Jian-zhao CAO De-wen ZHAO Shun-hu ZHANG Wen PENG Shu-zong CHEN Dian-hua ZHANG; Sponsored by National Natural Science Foundation of China(51074052,50734002); In order to analyze the hot tandem roiling force, a new logarithmic velocity field is proposed. Using the field and linear EA （equal area） yield criterion, the plastic deformation power for plate rolling is analyzed...; 关键词：hot tandem rolling rolling force logarithmic velocity field EA yield criterion analytical solution

Ti,Nb对17%Cr铁素体不锈钢焊接热影响区组织的影响被引量：2: 《焊接》2013年第8期22-25,70,共4页吴昌忠单亚廷罗兴宏范闽宁钱百年李鹏伟张明铭; 国家自然科学基金资助项目(50734002); 利用Gleeble-1500热模拟试验机对Ti,Nb微合金化的17%Cr超纯铁素体不锈钢(UP-FSS)进行了不同峰值温度下的热模拟试验,研究了焊接热影响区组织及其变化规律。结果表明:焊接热循环的峰值温度对铁素体晶粒长大有显著的影响,Nb合金化的不锈钢...; 关键词：超纯铁素体不锈钢微合金元素晶粒细化焊接热影响区第二相粒子

Limit Analysis of Defect-Free Pipe Elbow Under Internal Pressure With Mean Yield Criterion: 《Journal of Iron and Steel Research International》2013年第4期11-15,共5页ZHANG Shun-hu GAO Cai-ru ZHAO De-wen WANG Guo-dong; Sponsored by National Natural Science Foundation of China(51074052,50734002); With mean yield（MY）criterion,an analytical solution of the collapse load for a defect-free pipe elbow under internal pressure is first obtained.It is a function of ratio of thickness to radius t0/r0,strain hardening...; 关键词：limit analysis pipe elbow internal pressure strain hardening exponent MY criterion

双相不锈钢2205热变形行为的实验被引量：8: 《塑性工程学报》2012年第4期89-94,共6页王月香刘振宇王国栋周平; 国家自然科学基金重点资助项目(50734002); 利用扫描电镜的EBSD技术,通过对单道次压缩热模拟实验后淬火试样组织的深入系统分析,研究了2205双相不锈钢热变形过程中的软化行为。研究结果表明,2205双相不锈钢的主要软化机制为铁素体的连续动态再结晶和奥氏体与铁素体之间的相转变,...; 关键词：双相不锈钢复相组织热变形软化机理

Rolling With Simplified Stream Function Velocity and Strain Rate Vector Inner Product被引量：2: 《Journal of Iron and Steel Research International》2012年第3期20-24,共5页ZHAO De-wen, ZHANG Shun-hu, LI Can-ming, SONG Hong-yu, WANG Guo-dong (State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819, Liaoning, China); Sponsored by National Natural Science Foundation of China (51074052,50734002); The dual-stream function velocity field is reduced in order to analyze two-dimensional plate broadside roll- ing in roughing. The strain rate vector inner product and integral mean value theorem, as well as coqine vec...; 关键词：broadside roiling roll separating force strain rate vector inner product analytical solution

铁素体不锈钢高温氧化层生长及热轧粘辊研究被引量：9: 《东北大学学报（自然科学版）》2012年第2期195-198,共4页张驰王晓南刘振宇王国栋; 国家自然科学基金资助项目(50734002); 通过高温氧化实验研究了超纯21%Cr铁素体不锈钢高温氧化层的生长情况,并采用开发的模拟铁素体不锈钢热轧粘辊实验方法研究了表面氧化对超纯21%Cr铁素体不锈钢热轧粘辊的影响,探讨了铁素体不锈钢的热轧粘辊机理.实验发现:超纯21%Cr铁素...; 关键词：超纯铁素体不锈钢表面质量高温氧化粘辊热轧

Nb和Ti对超纯铁素体不锈钢凝固组织及表面起皱的影响被引量：13: 《材料热处理学报》2011年第9期23-28,共6页张驰刘振宇郑淮北马力王国栋; 国家自然科学基金(50734002); 通过真空感应炉浇注实验和热力学软件分析研究了Nb、Ti稳定化元素和C、N间隙元素含量对超纯铁素体不锈钢凝固组织及晶粒簇的影响。结果表明,添加稳定化元素后实验钢的结晶区间变宽,通过控制稳定化元素和间隙原子含量使实验钢在凝固过程...; 关键词：金属材料超纯铁素体不锈钢表面质量凝固组织晶粒簇表面起皱

精轧温度对含铌、硼Cr17薄板成形性及表面皱折的影响: 《材料热处理学报》2011年第8期96-101,共6页高飞于德健刘振宇王国栋; 国家自然科学基金和宝钢联合资质项目(50734002);国家自然科学基金青年基金(51004035); 通过光学显微镜、X射线衍射及背散射电子衍射技术,研究了精轧温度,即高温精轧和低温精轧,对含Nb、B的超纯Cr17铁素体不锈钢薄板成形性及表面皱折的影响。结果表明:低温精轧有利于得到细小及均匀的冷轧退火组织。低温精轧有利于改善冷轧...; 关键词：铁素体不锈钢精轧温度成形性能表面皱折

国家自然科学基金(50734002)