国家自然科学基金(50431030)

作品数:25被引量:72H指数:4
导出分析报告
相关作者:陈国良陈光惠希东姚可夫侯怀宇更多>>
相关机构:南京理工大学北京科技大学清华大学兰州理工大学更多>>
相关期刊:《International Journal of Minerals,Metallurgy and Materials》《Transactions of Nonferrous Metals Society of China》《稀有金属材料与工程》《特种铸造及有色合金》更多>>
相关主题:CU玻璃形成能力分子动力学模拟NI非晶合金更多>>
相关领域:金属学及工艺一般工业技术理学机械工程更多>>
-

检索结果分析

结果分析中...
条 记 录,以下是1-10
视图:
排序:
Nb对Zr基块体金属玻璃形成能力与显微硬度的影响被引量:2
《有色金属》2011年第1期62-65,77,共5页曹扬 陈光 盛婧 陈国良 
国家自然科学基金重点资助项目(50431030);江苏省高技术研究资助项目(BG2005005)
研究Nb元素掺杂对Zr基块体金属玻璃非晶形成能力与显微硬度的影响。采用水淬法制备直径13mm、长度为50~70mm的Zr基块体金属玻璃。金属玻璃成分为(Zr41.2Ti13.8Cu12.5Ni10Be22.5)100-xNbx(x=0,0.1,1,2,3,5)。当Nb元素掺杂量x=5时,XRD...
关键词:金属材料 块体金属玻璃 玻璃形成能力 玻璃转变 显微硬度 
Solute trapping model based on solute drag treatment
《Transactions of Nonferrous Metals Society of China》2010年第5期877-881,共5页王海丰 刘峰 陈正 杨伟 
Projects(50501020, 50395103, 50431030) supported by the National Natural Science Foundation of China; Project(NCET-05-870) supported by Program for New Century Excellent Talents in University of China; Project(CX200706) supported by the Doctorate Foundation of Northwestern Polytechnical University,China
A solute trapping model is developed based on a so-called solute drag treatment.By adopting a basic approach of phase-field models,and defining the free energy density in the interfacial region,a suitable interface sh...
关键词:solute trapping solute drag diffusive interface 
Effect of nonlinear liquidus and solidus on dendrite growth in bulk undercooled melts被引量:1
《Transactions of Nonferrous Metals Society of China》2010年第3期490-494,共5页陈正 王海丰 刘峰 杨伟 
Projects(50501020, 50395103, 50431030) supported by the National Natural Science Foundation of China;Project(NCET-05-870) supported by Program for New Century Excellent Talents in Chinese University;Project(CX200706) supported by the Doctorate Foundation of Northwestern Polytechnical University,China
On the base of nonlinear liquidus and solidus,an extended model for dendrite growth in bulk undercooled melts was developed under local non-equilibrium conditions both at the interface and in the bulk liquid.In terms ...
关键词:dendrite growth undercooled melts Ni-based alloys 
液态Cu等温凝固的分子动力学模拟被引量:2
《北京科技大学学报》2009年第9期1127-1131,共5页王荣山 侯怀宇 陈国良 
国家自然科学基金资助项目(No.50431030)
使用Tight-binding势函数,对液态Cu在等温凝固过程中的结构变化进行了分子动力学模拟(MD模拟)计算,得到体系在不同温度下的双体分布函数和配位数分布等静态结构信息,对等温凝固过程中FCC短程有序结构可能发生的变化以及由此导致的H-A键...
关键词:液态铜 等温凝固 分子动力学模拟 
Molecular dynamics simulation of Ni_3Al melting
《Journal of University of Science and Technology Beijing》2008年第4期425-429,共5页Rongshan Wang Huaiyu Hou Xiaodong Ni Guoliang Chen 
This study was financially supported by the National Natural Science Foundation of China (No.50431030).
With the Voter-Chen version of embedded-atom model (EAM) potential and molecular dynamics, the melting of Ni3Al alloy was simulated by one-phase (conventional) and two-phase approaches. It is shown that the simula...
关键词:NI3AL melting point molecular dynamics simulation EAM potential 
Novel titanium particles reinforced Zr-based bulk metallic glass composites prepared by infiltration casting
《Journal of University of Science and Technology Beijing》2008年第4期505-508,共4页Cuimei Zhang Xidong Hui Meiling Wang Guoliang Chen 
This study was financially supported by the National Natural Science Foundation of China (No.50431030, No.59871025, and No.50171006).
A novel Ti/Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 composite was successfully prepared by infiltrating the melt into sintered Ti preform. It shows that the introduction of Ti particles into the composite results in an increase...
关键词:melt infiltration bulk metallic-glass Ti particles mechanical properties 
Zr基金属玻璃原子结构研究被引量:3
《中国科学(G辑)》2008年第4期406-416,共11页惠希东 刘雄军 高蕊 侯怀宇 方华志 刘梓葵 陈国良 
国家自然科学基金(批准号:50431030,59871025);国家重点基础研究发展计划(编号:2007CB613901);高等学校学科创新引智计划(编号:B07003)资助项目
报道了利用经典分子动力学、逆蒙特卡罗模拟与第一性原理分子动力学模拟、以及高分辨透射电镜技术等对Zr-Ni和Zr-Ti-Al-Cu-Ni金属玻璃的原子结构进行的研究.重点研究了玻璃结构中的短程序结构(SRO)与中程序结构(MRO),研究表明,在Zr基金...
关键词:金属玻璃 原子结构 短程序 中程序 分子动力学 逆蒙特卡罗 
高强脉冲电流工艺参数对Fe基非晶合金纳米晶化的影响被引量:6
《稀有金属材料与工程》2008年第A04期687-690,共4页邱胜宝 姚可夫 
国家自然科学基金委员会(50431030和50671050);国家基础研究项目(2007CB613905)资助
高强脉冲电流能使Fe基非晶合金在低于非晶转变温度70~100K的条件下实现快速晶化。脉冲频率和处理时间对Fe基非晶合金晶化过程有显著影响。在高强脉冲电流的作用下,随着处理时间的增加,Fe基非晶合金先发生结构弛豫,然后在某一临界处理...
关键词:脉冲电流 FE基非晶合金 纳米晶化 显微组织 
Pd_(77.5)Cu_6Si_(16.5)块体非晶合金的制备与热稳定性被引量:1
《稀有金属材料与工程》2008年第A04期801-804,共4页姚可夫 李杨 杨依强 陈娜 
国家自然科学基金委员会(50431030和50671050);国家重点基础研究项目(2007CB613905)资助
采用玻璃包覆净化方法和水淬法,制备出了尺寸达7mm的Pd77.5Cu6Si16.5块体非晶合金样品。热分析结果表明,与熔体旋淬甩带法制备的Pd77.5Cu6Si16.5非晶条带样品相比,所制备的Pd77.5Cu6Si16.5块体非晶合金样品具有更低的玻璃转变温Tg、更...
关键词:玻璃熔覆 水淬 块体非晶合金 热稳定性 
Cu-Zr-Ti三元系非晶合金的玻璃形成能力预测
《稀有金属材料与工程》2008年第4期589-593,共5页葛丽 惠希东 陈国良 Liu Zikui 
国家自然科学基金(50431030,59871025);国家重点基础研究发展计划(“973”计划)(2007CB613901);U.S.National Science Foundation through the grant DMR-0510180
利用CALPHAD技术,分别采用Turnbull和Thompson-Spaepen(TS)两种近似公式计算了Cu-Zr-Ti三元系合金过冷熔体转变为晶体相的结晶驱动力。以连续形核理论为基础,利用Davies-Uhlmann公式计算了13种成分合金的两组温度-时间-转变曲线(r...
关键词:Cu-Zr-Ti三元系 玻璃形成能力 温度-时间-转变(TTT)曲线 临界冷却速度 
检索报告 对象比较 聚类工具 使用帮助 返回顶部