support of the National Basic Research Program of China (No. 2011CB610403);the National Natural Science Foundation of China (Nos. 51134011 and 51431008);Research Fund of the State Key Laboratory of Solidification Processing (117-TZ-2015);the China National Funds for Distinguished Young Scientists (No. 51125002);supports of the Doctorate Foundation of Northwestern Polytechnical University (No. CX201204);support of the National Science Foundation (No. DMR 1055504)
Dopants play a critical role in tailoring the microstructure during sintering of compacts. These dopants may form solid solution within the bulk, and/or segregate to the grain boundaries(GBs) and the solidvapor inte...
Project(51371149)supported by the National Natural Science Foundation of China;Project(151048)supported by the HUO Ying-dong Young Teacher Fund;Project(2015ZF53066)supported by the Aeronautical Science Foundation of China;Project(92-QZ-2014)supported by the Free Research Fund of State Key Laboratory of Solidification Processing,China;Project(2015KJXX-10)supported by Shaanxi Young Stars of Science and Technology,China;Proejct(2011CB610403)supported by the National Basic Research Program of China;Project(51125002)supported by the National Science Funds for Distinguished Young Scientists,China
In-situ formed (Cu0.6Zr0.3Ti0.1)95Nb5 bulk metallic glass (BMG) composite with Nb-rich dendrite randomly dispersed in hard glassy matrix was prepared by casting into a water-cooled copper mold. The dendrite has mu...
Project(2011CB610403)support by the National Basic Research Program of China;Projects(51134011,51431008)supported by the National Natural Science Foundation of China;Project(JC20120223)supported by the Fundamental Research Fund of Northwestern Polytechnical University,China;Project(51125002)supported by the National Funds for Distinguished Young Scientists of China
For the compromise of mechanical properties and product cost, the end-chilled sand casting technique was applied to studying the microstructure evolution of A356 Al alloy with cooling rate and the effect of different ...
financial support of the National Basic Research Program of China (No. 2011CB610403);the National Natural Science Foundation of China (Nos. 51134011 and 51431008);the Fundamental Research Fund of Northwestern Polytechnical University (No. JC20120223);the China National Funds for Distinguished Young Scientists (No. 51125002)
Solid-state phase transformation plays an important role in adjusting the microstructure and thus tuning the properties of materials. A general modular, analytical model has been widely applied to describe the kinetic...
Project(3102014KYJD002)supported by the Fundamental Research Funds for the Central Universities of China;Projects(50901059,51431008,51134011)supported by the National Natural Science Foundation of China;Project(2011CB610403)supported by the National Basic Research Program of China;Project(51125002)supported by the China National Funds for Distinguished Young Scientists;Project(JC20120223)supported by the Fundamental Research Fund of Northwestern Polytechnical University,China
The effect of cooling rate of the solidification process on the following solution heat treatment of A356 alloy was investigated,where the cooling rates of 96 K/s and 3 K/s were obtained by the step-like metal mold.Th...