国家自然科学基金(50975177)

作品数:7被引量:27H指数:4
导出分析报告
相关作者:孙方宏彭东辉王新昶陈乃超沈彬更多>>
相关机构:上海交通大学上海化工研究院上海交友钻石涂层有限公司更多>>
相关期刊:《Transactions of Nonferrous Metals Society of China》《上海交通大学学报》《Transactions of Tianjin University》《金刚石与磨料磨具工程》更多>>
相关主题:减压阀INSERTSMULTILAYERHFCVDCHEMICAL_VAPOR_DEPOSITION更多>>
相关领域:机械工程金属学及工艺一般工业技术化学工程更多>>
-

检索结果分析

结果分析中...
条 记 录,以下是1-7
视图:
排序:
Cutting performance of multilayer diamond coated silicon nitride inserts in machining aluminum-silicon alloy被引量:8
《Transactions of Nonferrous Metals Society of China》2013年第7期1985-1992,共8页陈乃超 孙方宏 
Project(50975177)supported by the National Natural Science Foundation of China
Aluminum-silicon (Al-Si) alloy is very difficult to machine and diamond tools are considered by far the best choice for the machining of these materials. Experimental results in the machining of the Al-Si alloy with...
关键词:aluminum-silicon alloy multilayer diamond films silicon nitride cutting performance 
Friction and Wear Performances of Hot Filament Chemical Vapor Deposition Multilayer Diamond Films Coated on Silicon Carbide Under Water Lubrication被引量:1
《Journal of Shanghai Jiaotong university(Science)》2013年第2期237-242,共6页陈乃超 孙方宏 
the National Natural Science Foundation of China (No. 50975177)
Tribological properties of chemical vapor deposition (CVD) diamond films greatly affect its application in the mechanical field. In this paper, a novel multilayer structure is proposed, with which multilayer diamond f...
关键词:multilayer diamond films chemical vapor deposition (CVD) hot filament CVD (HFCVD) 
基于有限元模拟的铜包铝线拉拔参数优化被引量:3
《机械设计与研究》2012年第3期73-76,共4页雷学林 林子超 孙方宏 张志明 沈荷生 郭松寿 
国家自然科学基金资助项目(50975177)
为研究拉拔参数对铜包铝线质量的影响,运用有限元方法对金刚石涂层拉拔模具拉拔铜包铝线的过程进行了模拟仿真,研究了拉拔过程中模具的应力分布情况,分析了压缩率对铜包铝线残余应力分布均匀性的影响规律。利用正交实验法研究了拉拔参数...
关键词:铜包铝线 有限元 拉拔参数 残余应力 
CVD金刚石涂层煤液化减压阀关键部件的制备被引量:4
《金刚石与磨料磨具工程》2011年第6期20-24,共5页王新昶 孙方宏 沈彬 彭东辉 张志明 
国家科技部科技人员服务企业行动项目资助(2009GJC0030);国家自然科学基金资助项目(50975177)
煤液化减压阀的工作条件非常苛刻,对其阀座、阀芯等关键部件在高温、高压差、高固态浓度流体冲蚀条件下的抗冲蚀磨损性能及使用稳定性提出了极高的要求。CVD金刚石涂层具有接近天然金刚石的优异性能,非常适合用于煤液化减压阀关键部件...
关键词:热丝CVD法 金刚石涂层 煤液化 减压阀 抗冲蚀磨损性能 使用寿命 
高压差高固含量减压阀的仿真优化设计被引量:8
《上海交通大学学报》2011年第11期1597-1601,共5页王新昶 孙方宏 孙乐申 丁庆华 彭东辉 
国家科技部科技人员服务企业行动项目(2009GJC0030);国家自然科学基金资助项目(50975177)
基于有限容积法,采用K-ε双方程湍流模型和Mixture多相流模型,对高压差高固态浓度流体冲蚀极端工况条件下工作的煤液化减压阀阀体内的压力分布和流场状态进行了计算流体动力学分析,研究了新型结构减压阀在不同开度下压降的变化情况,以...
关键词:煤液化减压阀 多相流 计算流体动力学 结构优化设计 
Wear Behavior of Diamond-Coated Drawing Dies被引量:1
《Transactions of Tianjin University》2011年第4期259-263,共5页林子超 孙方宏 沈彬 
Supported by National Natural Science Foundation of China (No. 50975177 and No. 51005154);China Postdoctoral Science Foundation (No. 20100470029);Tribology Science Fund of State Key Laboratory of Tribology (No. SKLTKF10B02)
The failure behavior of diamond-coated die was investigated experimentally and analytically through finite element method (FEM) simulation in the present work. Diamond coatings were fabricated by straight hot filament...
关键词:wire drawing diamond coating WEAR FEM simulation 
Friction and Cutting Properties of Hot-Filament Chemical Vapor Deposition Micro-and Fine-grained Diamond Coated Silicon Nitride Inserts被引量:4
《Journal of Shanghai Jiaotong university(Science)》2010年第5期519-525,共7页杨国栋 沈彬 孙方宏 
the National Natural Science Foundation of China (No. 50975177);the Shanghai Scienceand Technology Plan of Action for Technical Standardsfor Innovation and Special (No. 08DZ0501700)
The micro-crystalline diamond (MCD) and fine-grained diamond (FGD) films are deposited on commercial silicon nitride inserts by the hot-filament chemical vapor deposition (HFCVD) method. The friction andcutting proper...
关键词:silicon nitride hot-filament chemical vapor deposition(HFCVD) friction and wear glass fiber reinforced plastics(GFRP) 
检索报告 对象比较 聚类工具 使用帮助 返回顶部