国家重点基础研究发展计划(2007CB613905)

作品数:17被引量:55H指数:5
导出分析报告
相关作者:姚可夫魏炳忱谷建生李磊邱胜宝更多>>
相关机构:清华大学中国科学院力学研究所教育部上海大学更多>>
相关期刊:《Progress in Natural Science:Materials International》《中国材料科技与设备》《中国科学:物理学、力学、天文学》《稀有金属材料与工程》更多>>
相关主题:剪切带块体非晶合金ZRBULK_METALLIC_GLASSMECHANICAL_PROPERTIES更多>>
相关领域:一般工业技术金属学及工艺化学工程理学更多>>
-

检索结果分析

结果分析中...
条 记 录,以下是1-10
视图:
排序:
非晶合金透氢性能研究进展被引量:5
《稀有金属材料与工程》2014年第7期1787-1792,共6页丁红瑜 姚可夫 
国家重点基础研究计划"973"(2007CB613905);自然科学基金(50971073;51271095);教育部博士点基金(20120002110038)
由于在半导体工业及燃料电池等领域需要大量高纯度的氢气,因而必需对采用重整等工艺方法获得的含杂质气体的氢气进行纯化。采用金属膜对氢气进行分离是一种有效的氢纯化方法。非晶合金薄膜具有强度高、氢溶解度大、耐腐蚀、抗氢脆、成...
关键词:高纯氢气 金属分离膜 非晶合金 氢渗透率 
Ti-Zr-Be-Fe quaternary bulk metallic glasses designed by Fe alloying被引量:6
《Science China(Physics,Mechanics & Astronomy)》2013年第11期2090-2097,共8页GONG Pan WANG Xin SHAO Yang CHEN Na YAO KeFu 
supported by the National Basic Research Program of China(Grant No.2007CB613905);the National Natural Science Foundation of China(Grant Nos.51271095,51101090 and 50971073)
A series of Ti-Zr-Be-Fe bulk metallic glasses(BMGs)with good glass-forming ability(GFA)and high specific strength have been developed.With different alloying routes and content of Fe,it is found that these alloys exhi...
关键词:bulk metallic glasses alloying technique glass-forming ability mechanical properties 
Effect of thermal cycling on the mechanical properties of Zr_(41)Ti_(14)Cu_(12.5)Ni_(10)Be_(22.5) alloy被引量:10
《Science China(Physics,Mechanics & Astronomy)》2012年第12期2357-2361,共5页WANG Xin SHAO Yang GONG Pan YAO KeFu 
supported by the National Basic Research Program of China(Grant No.2007CB613905);the National Natural Science Foundation of China(Grant Nos.50971073,51101090 and 51271095);Beijing Natural Science Foundation(Effect of pre-cyclic loading on mechanical behaviors of bulk amorphous alloys)
The effect of thermal cycling treatment on mechanical properties and thermal stability of a Zr41Ti14Cu12.5Ni10Be22.5 bulk metallic glass is investigated.The metallic glassy samples are sealed into quartz tubes under h...
关键词:bulk metallic glass thermal cycling mechanical properties thermal stability 
Chemical composition dependence of atomic oxygen erosion resistance in Cu-rich bulk metallic glasses被引量:4
《Chinese Science Bulletin》2012年第36期4801-4804,共4页WANG Xin SHAO Yang YAO Ke-Fu 
supported by the National Basic Research Program of China(2007CB613905);the National Natural Science Foundation of China(50971073 and 51101090)
The effect of atomic oxygen(AO) on the surface oxidation of several typical Cu-based bulk metallic glasses(BMGs) was studied in the present work.The AO source using in this study is generated by discharge plasma type ...
关键词:块体金属玻璃 侵蚀性 原子氧 化学成分 耐氧化性 非晶合金 大块金属玻璃 地面模拟设备 
Centimeter-sized Ti-based bulk metallic glass with high specific strength被引量:1
《Progress in Natural Science:Materials International》2012年第5期401-406,共6页Pan Gong Ke-Fu Yao Xin Wang Yang Shao 
supported by the National Basic Research Program of China (Grant no. 2007CB613905);the National Natural Science Foundation of China (NSFC,Grant nos. 50971073 and 51101090)
Based on the quaternary Ti41Zr25Be29Al5 glassy alloy with a critical diameter of 7 mm reported not long ago,an obvious enhancement of glass-forming ability(GFA) has been realized in this alloy by the addition of Cu el...
关键词:METALLIC GLASSES Ti ALLOY GLASS-FORMING ABILITY MECHANICAL properties 
Zr基与Ti基非晶合金的不同划痕变形行为被引量:2
《中国科学:物理学、力学、天文学》2012年第6期603-608,共6页卢通 夏雷 胡铮 邢建硕 胡燕萍 徐光跃 魏炳忱 
国家自然科学基金(批准号:51071166;50731008;51171100);国家重点基础研究发展计划(编号:2007CB613905)资助项目
采用痕法研究了Zr47.9Ti0.3Ni3.1Cu39.3Al9.4与Ti40Zr25Be30Cr5两种非晶合金的塑性变特征,考查了载荷与痕速度对塑性变特征的影响.结果表明两种铸态非晶合金样品的剪切带表现出同的特征:Ti非晶合金在痕两侧剪切带现分枝特征,随着载荷和...
关键词:非晶合金  剪切带 塑性变 
Work toughening effect in Zr_(41)Ti_(14)Cu_(12.5)Ni_(10)Be_(22.5) bulk metallic glass被引量:6
《Chinese Science Bulletin》2011年第36期3942-3947,共6页QIU ShengBao GONG Pan YAO KeFu 
supported by the National Basic Research Program of China (2007CB613905);the National Natural Science Foundation of China (50671050 and 50971073);the National Center for Nanoscience and Technology of China
Work hardening is a well-known phenomenon occurring in crystalline metals during deformation,which has been widely used to increase the strength of metals although their ductility is usually reduced simultaneously. He...
关键词:大块金属玻璃 增韧效果 变形过程 自由体积 非晶合金 玻璃化转变 预变形 剪切带 
晶化分数对Zr基块体非晶基复相材料力学性能的影响被引量:2
《中国科学:物理学、力学、天文学》2010年第6期711-716,共6页邱胜宝 姚可夫 龚攀 
国家重点基础研究发展计划(编号:2007CB613905);国家自然科学基金(批准号:50671050;50971073)资助项目
采用脉冲电流预处理外加等温退火,制备得到了具有不同晶化分数的Zr_(41)Ti_(14)Cu_(12.5)Ni_(10)Be_(22.5)块体非晶基复相材料,并通过X射线衍射法和差示扫描量热法分析材料析出的物相及其晶化分数,通过显微硬度、单轴压缩实验和扫描电...
关键词:块体非晶合金 脉冲电流 晶化分数 塑性变形 剪切带 
Effects of crystallization fractions on mechanical properties of Zr-based metallic glass matrix composites被引量:9
《Science China(Physics,Mechanics & Astronomy)》2010年第3期424-429,共6页QIU ShengBao1,2, YAO KeFu1 & GONG Pan1 1 KLAMPT, Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China 2 Institute of Industry Technology, Guangzhou & Chinese Academy of Sciences, Guangzhou 511458, China 
supported by the National Basic Research Program of China (Grant No. 2007CB613905);the National Natural Science Foundation of China (Grant Nos. 50671050 and 50971073)
The Zr41Ti14Cu12.5Ni10Be22.5 (at.%) bulk metallic glass composites with various crystallization fractions were prepared by pretreating the bulk metallic glassy samples with pulsing current, and then by isothermal anne...
关键词:bulk metallic glass pulsing current CRYSTALLIZATION FRACTION PLASTICITY SHEAR band 
大块非晶合金的研究动态及应用前景
《中国材料科技与设备》2009年第3期5-8,共4页王玉良 张文泉 姚可夫 
国家“973”资助项目(2007CB613905)
综述了大块非晶合金的各种制备方法、性能特点及应用前景,主要介绍了国内外该领域主要的研究进展和研究动态。着重介绍了具有极大非晶形成能力的Zr基、Cu基大块非晶合金,它们都能在较低的冷却速率(1K/s左右)下用铜模铸造法制备,...
关键词:大块非晶合金 制备方法 力学性能 塑性 应用 
检索报告 对象比较 聚类工具 使用帮助 返回顶部