国家重点基础研究发展计划(2007CB613900)

作品数:41被引量:206H指数:8
导出分析报告
相关作者:严彪王宇鑫张瑜王华钰杨颖更多>>
相关机构:同济大学上海市金属功能材料开发应用重点实验室北京航空航天大学沈阳工业大学更多>>
相关期刊:《北京航空航天大学学报》《金属功能材料》《功能材料》《核技术》更多>>
相关主题:力学性能过共晶铝硅合金非晶合金ZR基非晶合金非晶形成能力更多>>
相关领域:一般工业技术金属学及工艺理学冶金工程更多>>
-

检索结果分析

结果分析中...
条 记 录,以下是1-10
视图:
排序:
Formation and mechanical properties of Zr-based bulk metallic glass composites with high oxygen levels
《Chinese Science Bulletin》2012年第30期3931-3936,共6页LIU ZengQian YANG YaoWei LI Ran HUANG Lu ZHANG Tao 
supported by the National Basic Research Program of China (2007CB613900);the National Natural Science Foundation of China(51071008);the Innovation Foundation of BUAA for PhD Graduate sand Fundamental Research Funds for the Central Universities
Zr-based bulk metallic glass(BMG) composites with in situ formed Y 2 O 3 particle reinforcements were synthesized by proper additions of Y to ultrahigh-oxygen-containing glass-forming alloy precursors.Microstructures,...
关键词:ZR基非晶合金 大块金属玻璃 复合材料 氧含量 力学性能 氧化物弥散强化 玻璃形成 BMG 
Fe-6.5%Si高硅钢的性能及制备技术被引量:13
《材料导报(纳米与新材料专辑)》2012年第1期392-396,共5页郑鑫 严彪 
国家973项目子课题(2007CB613900);上海市科学技术发展基金(08DZ2201300);上海市纳米专项(0752nm 004)
Fe-6.5%Si高硅钢是一种具有高磁导率、低矫顽力和低铁损等优异软磁性能的合金,但是其室温脆性和低的热加工性能严重影响了其在工业领域的应用。综述了Fe-6.5%Si高硅钢的性能,评述了合金的改性法、特殊轧制法、快速凝固法、沉积扩散法、...
关键词:Fe-6.5%Si高硅钢 磁性能 制备技术 
Compositional dependence of microstructure and tribological properties of plasma sprayed Fe-based metallic glass coatings被引量:4
《Science China(Technological Sciences)》2012年第5期1335-1342,共8页YANG Qin LI Ran LIU ZengQian SHI MinJie LUO XueKun ZHANG Tao 
supported by the National Basic Research Program of China (Grant No. 2007CB613900);the National Natural Science Foundation of China (Grant No. 51071008);the Fundamental Research Funds for the Central Universities
Gas-atomized powders of three Fe-based glass-forming alloys were sprayed on mild steel substrates by atmospheric plasma spaying using the same spaying parameters. Microstructures, thermal stabilities and tribological ...
关键词:metallic glasses MICROSTRUCTURE RAPID-SOLIDIFICATION coating materials X-ray diffraction 
650℃时效处理对2205双相不锈钢组织及硬度的影响被引量:2
《热处理》2012年第1期30-34,共5页范君伟 殷俊林 杜春风 严彪 
国家973项目子课题(NO.2007CB613900);上海市科学技术发展基金(08DZ2201300);上海市纳米专项(0752nm004)资助项目
研究了650℃时效处理对2205双相不锈钢组织的影响,发现,650℃时效5 h,钢中开始有中间相析出,析出相集中在α相及α/γ相界。TEM物相分析表明,析出相有R相和σ相。此外,随着时效时间的延长,γ相的硬度无明显变化,而α相的硬度则逐渐升高。
关键词:2205双相不锈钢 时效处理 硬度 
高强高韧Mg_(60)Cu_(16)Ni_(10)Nd_(14)块体非晶合金的研究被引量:3
《稀有金属材料与工程》2012年第1期96-99,共4页王毅坚 索忠源 邱克强 
辽宁省自然科学基金(20052041);国家"973"计划(2007CB613900)
采用铜模铸造法制备了直径为5mm的Mg60Cu16Ni10Nd14块体非晶合金,利用扫描电镜(SEM)、透射电镜(TEM)X射线衍射(XRD)和差示扫描量热仪(DSC)研究了其组织、相结构和热稳定性。结果表明:合金为完全的非晶结构,且出现了相分离;玻璃转变温度T...
关键词:Mg60Cu16Ni10Nd14块体非晶 非晶形成能力 相分离 塑性 
Centimeter-scale-diameter Co-based bulk metallic glasses with fracture strength exceeding 5000 MPa被引量:11
《Chinese Science Bulletin》2011年第36期3972-3977,共6页ZHANG Tao YANG Qin JI YunFei LI Ran PANG ShuJie WANG JianFeng XU Tao 
supported by the National Basic Research Program of China (2007CB613900);the National Natural Science Foundation of China (51071008)
Co48-xFexCr15Mo14C15B6Er2 (x = 2.5 and 5) bulk metallic glasses (BMGs) with critical size (dc) up to 15 mm in diameter were synthesized by copper mold casting. Co43Fe5Cr15Mo14C15B6Er2 BMG has a wide supercooled liquid...
关键词:大块金属玻璃 断裂强度 钴基 直径 厘米级 玻璃形成能力 非晶合金 体积弹性模量 
四种块体非晶合金在过冷液相区内的微成形能力
《稀有金属材料与工程》2011年第12期2162-2166,共5页张猛 李宁 谌祺 柳林 
国家自然科学基金(50636020);国家重大基础研究项目(2007CB613900)资助
采用Si模制作的V型槽微压印实验评价了4种具有不同脆度的块体非晶合金(Pd40Cu30Ni10P20,Zr65Cu15Al10Ni10,Cu46Zr42Al7Y5,Zr58.5Cu15.6Al10.3Ni12.8Nb2.8)在过冷液相区内的微成形能力。结果表明,尽管不同的BMG表现出不同的表观粘度,但...
关键词:块体非晶合金 过冷液相区 脆度 微成形能力 
几种金属间化合物电学性能的研究进展与展望被引量:1
《材料导报》2011年第21期58-61,共4页李杰 张瑜 严彪 
国家973项目子课题(2007CB613900);上海市科学技术发展基金(08DZ2201300);上海市纳米专项资助项目(0752nm004)
金属间化合物具有高强轻质及电阻率较高的特点,是一种极具发展前途的功能材料。影响其电学性能的因素有添加元素、合金化元素的原子半径、电子层结构、金属键的数量及晶体结构的无序性。总结了不同类型金属间化合物的电学性能方面的研...
关键词:金属间化合物 电学性能 电阻率 
Correlation between supercooled liquid region and crystallization behavior with alloy composition of La-Al-Cu metallic glasses
《Science China(Physics,Mechanics & Astronomy)》2011年第9期1608-1611,共4页ZHANG QingChao PANG ShuJie LI Yi ZHANG Tao 
supported by the National Natural Science Foundation of China (Grant Nos. 50631010, 50771005 and 50771006);the National Basic Research Program of China (Grant No. 2007CB613900)
Bulk metallic glasses (BMGs) with large supercooled liquid region are promising materials for superplastic forming. In this paper, we demonstrate a microstructure-based strategy to pinpoint the composition with the la...
关键词:bulk metallic glass supercooled liquid region CRYSTALLIZATION 
过共晶铝硅合金耐磨性能的研究进展被引量:8
《金属功能材料》2011年第4期72-76,共5页杨颖 王宇鑫 张瑜 王华钰 严彪 
国家973项目子课题(NO.2007CB613900);上海市科学技术发展基金(08DZ2201300);上海市纳米专项(0752nm004)资助项目
过共晶铝硅合金是一种软基体上分布着硬质点的理想轻质耐磨结构材料。研究表明影响其耐磨性能的主要因素包括微观结构和工况条件,其中硅相的含量、形态、分布有非常大的影响。本文总结了过共晶铝硅合金的磨损机理和提高耐磨性能的工艺方...
关键词:过共晶铝硅合金 耐磨性能 微观结构 
检索报告 对象比较 聚类工具 使用帮助 返回顶部