相关期刊:《Journal of Minerals and Materials Characterization and Engineering》《Acta Metallurgica Sinica(English Letters)》《China Foundry》《Journal of Wuhan University of Technology(Materials Science)》更多>>
Project(2015M572135)supported by the China Postdoctoral Science Foundation;Project(2012CB619600)supported by the National Basic Research Program of China
The effect of iron content on wear behavior of hypereutectic Al?17Si?2Cu?1Ni alloy produced by rheocasting process was investigated. The dry sliding wear tests were carried out with a pin-on-disk wear tester. The resu...
In the present study, in-situ Ti B2 particle-reinforced 7075 aluminum alloy was produced by adding a mixture of K2 Ti F6 and KBF4 to the molten base alloy. The effects of the addition of 4.5wt.% and 9wt.%Ti B2 on the ...
This article reports the effects of stirring speed and T6 heat treatment on the microstructure and mechanical properties of Al-2024 alloy synthesized by a rheocasting process. There was a decrease in grain size ofα-A...
supported by the National Science Foundation of Jiangsu province,China (No.BK20131193)
To produce a high quality semisolid slurry that consists of fine primary particles uniformly suspended in the liquid matrix for rheoforming, chemical refining and electromagnetic or mechanical stirring are the two met...
The effects of ultrasonic vibration(UV)treatment on microstructure of semi-solid aluminum alloys and the application of UV in rheocasting process are reviewed.Good semi-solid slurry can be produced by high-intensity U...
The microstructure and mechanical properties of rheocasting AZ91 magnesium alloy were investigated. The semisolid slurry of this alloy was prepared by ultrasonic vibration (USV) process and then shaped by high press...
financially supported by the National Basic Research Program of China(No.2011CB606302-1);the National Natural Science Foundation of China(No.51074024)
The microstructure characteristics and mechanical properties of 7075 aluminum alloy produced by a new rheoforming technique,under as-cast and optimized heat treatment conditions,were investigated.The present rheoformi...
supported by the National Natural Science Foundation of China(Grant Nos.50374012,51144009);the National Natural Science Foundation of Jiangxi Province(Grant No.0650047);the Science and Technology Program of the Education Department of Jiangxi Province(Grant No.GJJ09229);the Science Research Foundation of Jiangxi University of Science and Technology(Grant No.jxxjzd10003)
To obtain the semi-solid slurry with uniform and fine structure morphology that satisfies the requirement of rheocasting process, a new process for preparing semi-solid AI alloy slurry was developed, in which local ch...
Project (2007CB613700) supported by the National Basic Research Program of China;Project (50964010) supported by the National Natural Science Foundation of China
A novel rheocasting process, self-inoculation method (SIM), was developed for the microstructure control of semisolid wrought Mg alloy. This process involves mixing between liquid alloy and particles of solid alloy ...
DST, New Delhi for their financial support to this work
Present trend of semi-solid processing is directed towards rheocasting route which allows manufacturing of near-net-shape cast components directly from the prepared semi-solid slurry. Generation of globular equi-axed ...