the financially support of the National Natural Science Foundation of China(No.21576255 and No.21577141);Dalian Science Fund for Distinguished Young Scholars(2018RJ09)。
The conversion of carbon dioxide to chemicals by the electrochemical reactions(ERC)is an efficient solution to the current energy crisis and excess CO_(2) emissions.It is still a great challenge and of significance to...
the Natural Science Foundation of Jiangsu Province of China(No.BK20170796);the foundation of‘‘Jiangsu Provincial Key Laboratory of Bionic Functional Materials”of China(No.NJ2020026);the foundation of National Defense Key Laboratory of China(No.6142004190204);the National Natural Science Foundation of China(No.52075249)。
Bionic adhesives with tip-expanded microstructural arrays have attracted considerable interest owing to their high adhesive performance at low preloads.Their mainstream manufacturing method is molding.Due to most mold...
financially supported by National Key R&D Program of China(Nos.2017YFC0211503,2016YFC0207100);the National Natural Science Foundation of China(Nos.21401200,51672273);the Open Research Fund of State Key Laboratory of Multi-phase Complex Systems(No.MPCS-2017-D-06)。
A hierarchically structured MnO_(x)-NiCo_(2)O_(4) monolithic catalyst with rich phase interfaces was designed by a simple,eco-friendly and time-saving in-situ electro-deposition method.The abundance of active oxygen s...
supported by the National Natural Science Foundation of China(Grant Nos.51605293 and 51702213);the Shanghai Science and Technology Commission(18060502300).
Effective thermal management of electronic integrated devices with high powder density has become a serious issue,which requires materials with high thermal conductivity(TC).In order to solve the problem of weak bondi...
Funded by the National Natural Science Foundation of China(Nos.51778209,51609075);the National Key R&D Program of China(No.2016YFC0401804)
An electro-deposition method has been recently proposed to repair cracked reinforced concrete. To evaluate the corrosion resistance of the reinforcing steel in cracked concrete, three different parameters including ty...
Funded in Part by the Fundamental Research Funds for the Central Universities(Nos.300102318205,310831161020,310831163401);the National Natural Science Foundation of China(No.51301021);the China Postdoctoral Science Foundation(No.2016M592730);the Innovation and Entrepreneurship Training Program of Chang’an University(No.201610710084);the Fund of the State Key Laboratory of Solidification and Processing in Northwestern Polytechnical University(No.SKLSP201302)
The parameters for the electro-deposition of Cu were optimized in order to increase the compressive properties of close cell aluminum. Different values of deposition voltages and times were considered to vary the amou...
Uranium plating prepared by electro-deposition method can be used in high temperature fission ionization chamber,so it’s an important work to determine the optimum preparation conditions and detect the quality and th...
the National Natural Science Foundation(Nos.51479051,51778209,51609075,and 51508158);the Fundamental Research Funds for the Central Universities(2016B08414);the National Key R&D Program of China(Nos.2016YFC0401610 and2016YFC0401804)
To evaluate the effect of pulse parameters on the formation of electrodeposits in concrete cracks, five different types of pulse current were set up, and ZnSO_4 and MgSO_4 solutions were used as the electrolytes. The ...
Supported by the National Basic Research Program(973 Program)of China(2010CB227201);the State Key Program of National Natural Science of China(21236003);the National Natural Science Foundation of China(21476022);the Fundamental Research Funds for the Central Universities(JD1515 and YS1406);Beijing Higher Education Young Elite Teacher Project(YETP0509)
An investigation was performed on the suitability of carbon materials, metallic lead and its alloys as substrates for zinc negative electrode in acid PbO2-Zn single flow batteries. The zinc deposition process was carr...
One simple and fast way to manufacture a useful product from CO2 is to capture the gas by, and then carry out electrolysis in molten alkali metal carbonates. Carbon electro-deposition in molten Li2CO3-Na2CO3- KaCO3 (...