Financial supports of the National Natural Science Foundation of China(21878050,91934301);the State Key Laboratory of Coal Conversion(J21-22-620);the 111 Project(D17005)。
Pt-based catalysts are widely used in propane dehydrogenation reaction for the production of propylene.Suppressing irreversible deactivation caused by the sintering of Pt particles under harsh conditions and regenerat...
This work is supported by the National Key R&D Program of China(2017 YFB0304200);the National Natural Science Foundation of China(51734004).
The Taguchi and analysis of variance (ANOVA) methods were applied to investigate the effects of the structural and operational parameters on the heat transfer performance of a vertical sinter cooling packed bed. The a...
supported by the National Science Fund for Distinguished Young Scholars of China(21825801);the National Natural Science Foundation of China(21972019,21978051).
To stabilize Ru nanoparticles against sintering is an urgent problem in the utilization of Ru-based catalysts for NH3 synthesis.In the present study,we used Ru-containing ZSM-5 as seeds to crystallize ZSM-5,and the re...
Sintering process plays an important role in iron and steel smelting process.The subsequent production of blast furnace ironmaking is directly affected by the quality of sinter.Among them,the proportion of raw materia...
CONACYT grant A1-S-9232;CONACYT for the Ph.D. scholarship
In the search of lead-free piezoelectric materials,ceramic processing techniques offer potential tools to increase the piezoelectric and ferroelectric properties in addition to new chemical compositions.Powders of pur...
The behaviors of typical iron ores at high temperature were observed by confocal scanning laser microscopy. Four critical temperature points and liquid flow velocity at high temperatures of iron ores were obtained and...
Project(2011GH561685)supported by the China Torch Program
Solid wastes derived from metallurgical industries pose a significant threat to environment. The utilization and disposal of these solid wastes are the major concern in the world. Semi-coke generated in coal-based dir...
financially supported by the Fundamental Research Funds for the Central Universities of China (No. FRF-IC-14-006)
Sinter body strength, which reflects the strength of sinter, plays an important role in the improvement of sinter. In this study, the sinter body strengths of iron ores were measured using a microsintering method. The...
Financial supports from the National Natural Science Foundation of China(No.50902082);the State Key Laboratory of Electrical Insulation and Power Equipment (EIPEl 1208)
Densification behaviors of SrO-BaO-Nb2O5-SiO2 based glass-ceramics prepared by conventional sintering were investigated with an emphasis on the influence of P2O5 content. Although P2O5 dopant did not modify the surfac...
This paper presented the microstructure, mechanical properties and oxidation behavior of silicon nitride obtained by both conventional sintering and sintering followed by hot isostatic pressing (HIP). Silicon nitrid...