相关期刊:《Acta Mechanica Solida Sinica》《High Power Laser Science and Engineering》《Chinese Journal of Mechanical Engineering》《Journal of Civil Engineering and Architecture》更多>>
supported by the National Natural Science Foundation of China(No.12472340).
This paper aims to experimentally and numerically probe fatigue behaviours and lifetimes of 3D4D(three-dimensional four-directional)braided composite I-beam under four-point flexure spectrum loading.New fatigue damage...
In the construction of cast-in-place bridge deck of prefabricated I-beam by pretension folding line method, I-beam is used as the main stress support, well-shaped support is used on the inner side, triangular stable s...
The authors acknowledge support from the project Advanced Research Using High-Intensity Laser-Produced Photons and Particles(ADONIS)(CZ.02.1.01/0.0/0.0/16—019/0000789);by the project High Field Initiative(HiFI)(CZ.02.1.01/0.0/0.0/15_003/0000449),both from European Regional Development Fund.
The design and the early commissioning of the ELI-Beamlines laser facility’s 30 J,30 fs,10 Hz HAPLS(High-repetitionrate Advanced Petawatt Laser System)beam transport(BT)system to the P3 target chamber are described i...
The authors acknowledge support from the projects“Advanced Research Using High Intensity Laser Produced Photons and Particles(ADONIS)”(Grant No.CZ.02.1.01/0.0/0.0/16_019/0000789);“High Field Initiative(HiFI)”(Grant No.CZ.02.1.01/0.0/0.0/15_003/0000449);both from the European Regional Development Fund.The results of the Project LQ1606 were obtained with financial support from the Ministry of Education,Youth and Sports as part of targeted support from the National Program of Sustainability II.
The P3 installation of ELI-Beamlines is conceived as an experimental platform for multiple high-repetition-rate laser beams spanning time scales from femtosecond via picosecond to nanosecond.The upcoming L4n laser bea...
supported by the Natural Science Foundation of Jiang-su Province(Grant No.BK20181402);the National Natural Science Foundation of China(Grant No.51878354);a Project Funded by the National First-class Disciplines(PNFD);a Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD);a Project Funded by the Co-Innovation Center of Efficient Processing and Utilization of Forest Resources,Nanjing Forestry University(Nanjing,210037,China).
In order to enhance the bearing capacity of structural components,save materials,and reduce cost,a glued laminated timber(glulam)I-beam that is theoretically suitable for engineering application was proposed.In this s...
This paper addresses the studies carried out on an I-beam to reveal the wave propagation characteristics and tackle the multi-mode propagation of Lamb waves. The experimental setup consisted of a new 3D Scanning Laser...
The authors acknowledge support from the project ELI:Extreme Light Infrastructure from European Regional Devel-opment(CZ.02.1.01/0.0/0.0/15-008/0000162);Also supported by the project High Field Initiative(CZ.02.1.01/0.0/0.0/15-003/0000449)from European Regional Development Fund.
ELI-Beamlines(ELI-BL),one of the three pillars of the Extreme Light Infrastructure endeavour,will be in a unique position to perform research in high-energy-density-physics(HEDP),plasma physics and ultra-high intensit...
A triangular web profile (TriWP) is a modified section where the flanges are connected to a web plate of triangular profile. This study examined the torsional behavior of TriWP steel sections and compared to that of...
Project(2014QNA50) supported by Fundamental Research Funds for the Central Universities,China;Project(51404248) supported by the National Natural Science Foundation of China;Project supported by the Priority Academic Program Development(PAPD) of Jiangsu Higher Education Institutions,China
The installation of a back-wall guard-board is the key to successfully supporting underground retreating roadways in coal mines. Based on the coordinate support principle, and using an I-shaped steel support for the s...
Bridge girders exposed to aggressive environmental conditions are subject to time-variant changes in resistance. There is therefore a need for evaluation procedures that produce accurate predictions of the load-carryi...