support by the National Key Research and Development Program of China(2022YFB3809000);the Natural Science Foundation of China(No.52175188);Key Research and Development Program of Shaanxi Province(2023-YBGY-434);the Open Fund of Liaoning Provincial Key Laboratory of Aero-engine Materials Tribology(Grant No.LKLAMTF202301);State Key Laboratory for Mechanical Behavior of Materials(20222412).
Metal matrix self-lubricating materials lie at the core of cutting-edge aerospace,mechanical,and electrical industries,which demand technological performances that cannot be met by traditional liquid lubricants.Rapid ...
National Natural Science Foundation ofChina,Grant/Award Number:52275212;Fundamental Research Funds for theCentral Universities,Grant/Award Number:D5000230047;the"Special Lubrication and Sealing forAerospace"Shaanxi Provincial Scienceand Technology Innovation Team,Grant/Award Number:2024RS-CXTD-63。
MAX phase ceramics is a large family of nanolaminate carbides and nitrides,which integrates the advantages of both metals and ceramics,in general,the distinct chemical inertness of ceramics and excellent physical prop...
supported by the National Natural Science Foundation of China(52375201);Project for Science and Technology Plan of Henan Province(242102221026,242102220054).
Wind power gears will be excessively worn due to lubrication failure during operation.Herein,the tribological properties of rubbing pairs are improved by filling solid lubricants into surface texture.In texture design...
Erratum to Friction 10(6):803–841(2022)Yahong Xue,Jigang Chen,Sumin Guo,Qingliang Meng&Junting Luo.Finite element simulation and experimental test of the wear behavior for self-lubricating spherical plain bearings.Fr...
National Natural Science Foundation of China(No.51871051);Fourth Batch of Ningxia Youth Talents Supporting Program(No.TJGC2019028).
Titanium alloys are of keen interest as lightweight structural materials for aerospace and automotive in-dustries.However,a longstanding problem for these materials is their poor tribological performances.Herein,we de...
supported by the National Natural Science Foundation of China(Grant No.51975564);the Sichuan Science and Technology Project(Grant No.2021YFSY0050);the State Key Laboratory of Acoustics,Chinese Academy of Sciences(SKLA202214);the Fundamental Research Funds for the Central Universities(2682021CX103).
The single-phase high-entropy alloy film is difficult to meet severe friction conditions due to its low hardness and high friction coefficient.Nano-composite structure film is composed of at least two separated phases...
The authors are grateful for the financial support from National Natural Science Foundation of China(No.52075560).
High-temperature ablation is a common failure phenomenon that limits the service life of the transmission parts on heavy-duty machines used in heavy load,high temperature,high shock conditions due to in-sufficient sup...
support from the National Natural Science Foundation of China (51905212);Guangdong Key Laboratory of Modern Surface Engineering Technology (2020B1212060049);Science and Technology Project of Guangdong Academy (2021GDASYL-20210103062);Young Scientific and Technological Talents Promotion Project of Guangzhou Science and Technology Association (X20210201061);Foshan Taoyuan Institute of Advanced Manufacturing (TYKF202203003).
The self-lubricating ceramic coatings that can control friction and wear have attracted researchers’widespread attention.However,the poor interfacial bonding between lubricants and ceramics and the deterioration of m...
High-performance polymers(HPPs)are increasingly used in different industrial machinery components,particularly for rubbing parts that demand reliable and durable operation at extreme sliding conditions such as elevate...
This work was funded by the Austrian COMET Programme(Project K2 InTribology,Grant No.872176)in addition to M-ERA.NET(project 872381 HOTselflub);has been carried out within the“Austrian Excellence Center for Tribology”(AC2T research GmbH).
Iron-based coatings with the incorporation of solid lubricants have been prepared by means of laser cladding,in an effort to control friction and decrease tool wear at high temperatures during metal forming applicatio...