funded by the National Key R&D Program of China(Nos.2020YFF0304600 and 2019YFF0302100);the National Natural Science Foundation of China(No.52275200).
Low friction ice sliding interfaces were critical for ski performance optimization.Traditional fluorinated ski waxes have attracted considerable attention for enhancing the hydrophobicity,anti-wearing,and oxidation re...
This work was funded by the Austrian COMET Programme(Project K2 InTribology,Grant No.872176)in addition to M-ERA.NET(project 872381 HOTselflub);has been carried out within the“Austrian Excellence Center for Tribology”(AC2T research GmbH).
Iron-based coatings with the incorporation of solid lubricants have been prepared by means of laser cladding,in an effort to control friction and decrease tool wear at high temperatures during metal forming applicatio...
This work was supported by the National Natural Science Foundation of China(51673205);the Key Research Program of Frontier Science,Chinese Academy of Sciences(QYZDJ‐SSW‐SLH056);the National Basic Research Program of China(2015CB057502).
The tribological behaviors of Ti–Ni51.5 at%alloy strengthened by finely dispersed Ni_(4)Ti_(3) particles in reciprocating sliding against GCr15,Al_(2)O_(3),and ZrO_(2) at room temperature were studied.Interestingly,t...
supported by Yangjiang science and technology project (0202010067);Yangjiang polytechnic for providing financial assistance.
In-situ synthesized ceramic such as TiC,Cr7C3 and Cr5B3 reinforced Ni-based alloy composite coating was fabricated on the surface of mild steel substrate by reactive braze coating processing with colloidal graphite,Cr...
Funded by National Natural Science Foundation of China(No.51805183)
The tribological properties of Nickel-based composites containing Ti3 SiC2 and Ag2 W2 O7 fabricated by spark plasma sintering against Si3 N4 balls were investigated using a ball-on-disk tribometer from room temperatur...
Project (JPPT-115-5-1759) supported by the National Defense Science and Technology Industry Committee of China; Project (20090162120080) supported by Research Fund for the Doctoral Program of Higher Education of China;Project (2010FJ3012) supported by the Program of Science and Technology of Hunan Province, China
Multi-walled carbon nanotubes (MWNTs) were wet-milled in the presence of ammonia and cationic surfactant and then used as reinforcements to prepare Ni-P-MWNTs composite coatings by electroless plating. The tribologi...
Project (51204105) supported by the National Natural Science Foundation of China;Project (11ZR1418000) supported by the Shanghai Natural Science Foundation, China
The friction and wear properties of the electrolessly-deposited Ni-P-Gr-SiC composites were investigated. The effects of graphite content, load and rotation speed on the friction coefficient and wear resistance of the...
grateful to the financial supported from the China Postdoctoral Science Foundation (Grant no.2012M510271);the National Natural Science Foundation of China (Grant no. 51101055);the National Science & Technology Support Program (Grant no. 2012BAI18B05);the National High Technology Research and Development Program of "863" (Grant no. 2011AA030104);the National Basic Research Program of"973"(Grant no. 2009CB930004)
The NiAl based materials including NiAl-TiC-Al2O3 composite,NiAl-Cr(Mo)-Hf-Ho eutectic alloy and NiAl-Cr(Mo)-CrxSy in situ composite were fabricated and their wear properties were tested at different temperatures.The ...
Tribological properties of non-hydrogenated diamond-like carbon (DLC) films were investigated under humid (RH=80%) and dry (RH=5%) air. These films were deposited by pulsed laser deposition (PLD) at different substrat...
Project 2006A021 supported by the Science Foundation of China University of Mining & Technology
Graphite antimony composites were prepared using a mechanical pressure infiltration method to force molten antimony into graphite preforms having a percolation micro-structure and a hop-pocket power filler. The micro-...