相关期刊:《Friction》《Journal of Wuhan University of Technology(Materials Science)》《Transactions of Nonferrous Metals Society of China》《Chinese Journal of Aeronautics》更多>>
Solid lubrication is an excellent option to reduce friction and wear in dry sliding conditions,as well as a secondary source of protection in fluid-lubricated systems.Considering the most widely used solid lubricants,...
supported by the Tribology Science Fund of State Key Laboratory of Tribology in Advanced Equipment(SKLT)(contract number:SKLTKF21B01);the National Natural Science Foundation of China(No.52175165);the Natural Science Foundation of Jiangsu Province,China(Project No.BK20200470).
The formation of tribolayers may play significant influences on fretting wear.At elevated temperature,the adhesion among wear debris and the increased diffusion rate facilitate the formation of tribolayers.However,the...
the following Brazilian agencies for funding this research:CNPq,CAPES,BNDES and the Chilean agency ANID Vinculación Internacional FOVI220096(No.72190023)as well as Nidec Global Appliance/Embraco.
Carbon-based solid lubricants are excellent options to reduce friction and wear,especially with the carbon capability to adopt different allotropes forms.On the macroscale,these materials are sheared on the contact al...
financially supported by the National Natural Science Foundation of China(Nos.51921003 and 51775275);National Major Science and Technology Projects of China(No.2017-VII-0002-0095);Six Talents Summit Project in Jiangsu Province(No.JXQC-002)。
Fretting wear has an adverse impact on the fatigue life of turbine blade roots.The current work is to comparatively investigate the fretting wear behaviour of the nickel-based superalloy surfaces produced by polishing...
Dry sliding wear behaviour of stir-cast aluminium matrix composites(AMCs)containing LM13 alloy as matrix and ceramic particles as reinforcement was investigated.Two different ceramic particle reinforcements were used ...
Swerea IVF for the financial and material support。
The use of high strength aluminium alloys,such as 6 XXX and 7 XXX series,is continuously increasing for automotive applications in view of their good strength-to-weight ratio.Their formability at room temperature is l...
Funded by National Natural Science Foundation of China(No.51805183)
The tribological properties of Nickel-based composites containing Ti3 SiC2 and Ag2 W2 O7 fabricated by spark plasma sintering against Si3 N4 balls were investigated using a ball-on-disk tribometer from room temperatur...
the he MFW-BW(Ministeriumfür Wirtschaft,Arbeit und Wohnungsbau Baden-Württemberg,Project:BioSis)for funding this project
The effect of galvanically induced potentials on the friction and wear behavior of a 1 RK91 stainless steel regarding to tribocorrosion was investigated using an oscillating ball-on-disk tribometer equipped with an el...