financially supported by the National Natural Science Foundation of China (Nos.52061005 and 52261025);the Science and Technology Program of Guizhou Province (Nos.YQK[2023]009 and [2023]278)。
The deformation and fracture failure of aerospace structural components are primarily affected by complex loading conditions.This study aims to investigate how various pre-tension strains(0%,4%and 6%)influence the tor...
The stiffness required for the normal operation of membrane roof comes from the application of pre-tension. When the pre-tension is too small, it is easy to cause instability under the action of wind load, which leads...
financially supported by the National Natural Science Foundation of China(Nos.51875317 and 52222510);the Key Research and Development Program of Shandong Province(No.2021ZLGX01).
The pre-tension was induced to suppress the abnormal grain growth(AGG)of ZK60 Mg profile during solution treatment.The effects of pre-tension on the microstructure evolution and mechanical properties were studied,and ...
Project supported by the National Natural Science Foundation of China(Nos.12172204,11772182,11272193,and 10872121);the Program of Shanghai Municipal Education Commission(No.2019-01-07-00-09-E00018);the Natural Science Foundation of Shanghai of China(No.22Z00142)。
DNA nanotubes(DNTs)with user-defined shapes and functionalities have potential applications in many fields.So far,compared with numerous experimental studies,there have been only a handful of models on the mechanical ...
supported by the National Natural Science Foundation of China(Nos.51575068 and 51501023);the State Key Research and Development Program of MOST,China(No.2016627 YFB0701204);the Fundamental Research Funds for the Central Universities(No.2020CDJDPT001);the Chongqing Natural Science Foundation(Nos.cstc2018jcyjAX0364 and cstc2021jcyj-msxmX0699);the“111”Project of the Ministry of Education(No.B16007).
Conventional wrought Mg alloys,such as AZ31 and ZK60 rolled plates,usually exhibit significantly low tensile yield strength in the thickness direction.This can be attributed to the high activity of{10-12}tension twinn...
supported by the National Basic Research Program of China(No.2019283-006);Natural Science Basic Research Program of Shaanxi,China(No.2020JQ-113);Fundamental Research Funds for the Central Universities,China(No.G2019KY05106)。
Process-induced deformation is an important limiting factor to the application of high performance composite structures.An alternative method to reduce process-induced deformation is proposed by introducing prestress ...
In the construction of cast-in-place bridge deck of prefabricated I-beam by pretension folding line method, I-beam is used as the main stress support, well-shaped support is used on the inner side, triangular stable s...
co-supported by the National Natural Science Foundation of China (No.51575262);the China Postdoctoral Science Foundation (No.2015M571754);the Aeronautical Science Foundation of China (No.2015ZB52008)
In this paper, ballistic impact tests on wrapped multi-layer Kevlar 49 woven fabric systems were carried out with a flat blade projectile to investigate the impact response during a fan blade out event. The influences...
It is arguable that the development of reinforcing roof bolting systems has largely stagnated in recent times, primarily due to the prevailing industry view that few, if any, further improvements can be made to what c...