supported by the National Natural Science Foundation of China (Nos.52201120 and 52004100);the Open Funds of the State Key Laboratory of Rare Earth Resource Utilization (RERU2022013);the Fundamental Research Funds for the Central Universities,JLU。
The age-hardening behavior and precipitation evolution of an isothermal aged Mg-5Sm-0.6Zn-0.5Zr(wt.%) alloy have been systematically investigated by means of transmission electron microscopy(TEM) and atomic-resolution...
supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020;the financial support of the European Research Council(ERC)under the European Union’s Horizon 2020 research and innovation program(Grant No.771146 TOUGHIT);funded within the AIT’s strategic research portfolio 2022 and by the European Commission within the framework INTERREG V-A Austria–Czech Republic in the project“ReMaP“(Interreg project no.ATCZ229)。
In recent years,wire-arc directed energy deposition(wa DED),which is also commonly known as wire-arc additive manufacturing(WAAM),has emerged as a promising new fabrication technique for magnesium alloys.The major rea...
The authors would like to acknowledge the financial support received from the National Science Foundation(Nos.NSF-CMMI 1760204 and NSF-CMMI 2131440)under the direction of Dr.Alexis Lewis.This work was performed in part at the Analytical Instrumentation Facility(AIF)at North Carolina State University,supported by the State of North Carolina and the National Science Foundation(award number ECCS-2025064).The AIF is a member of the North Carolina Research Triangle Nanotechnology Network(RTNN),a site in the National Nanotechnology Coordinated Infras-tructure(NNCI).
The effect of age-hardening on microstructure,hardness,and corrosion of an Al-5at.%V alloy,produced us-ing high-energy ball milling and subsequent cold compaction,has been investigated.The alloy exhibited a grain size...
supported by the National Natural Science Foundation of China(Nos.U2037601,51775334 and 51821001);the National Key Research&Development Program of China(No.2016YFB0701205);the Joint Innovation Fund of CALT and College,China(No.CALT2020-TS07);the Open Fund of State Key Laboratory of Advanced Forming Technology and Equipment,China(No.SKL2020005);the Research Program of Joint Research Center of Advanced Spaceflight Technologies,China(No.USCAST2020-14).
This work investigated the effects of different Y additions(0,1.5,3.0 and 4.5 wt.%)on the microstructural evolution and mechanical performance of cast Mg−3Nd−0.2Zn−0.5Zr alloy.The results show that as the Y content in...
the Natural Science Foundation of Inner Mongolia under Grant No.2020MS05014;the Science and Technology Planning of Inner Mongolia under Grant No.2020GG0318.
The microstructure evolution and age-hardening response for different Sm/Sn ratios(0-2.55,in wt.%)of Mg-Sn-Sm alloys were investigated.The second phase formation in as-cast alloys and the Mg_(3)Sm precipitates formed ...
the National Key R&D Program of China(No.2016YFB0301100);the National Natural Science Foundation of China(No.51571043);Fundamental Research Funds for the Central Universities(Nos.2020CDJDPT001,cqu2018CDHB1A08 and 2018CDGFCL0005)。
To gain insight into the ageing behavior of ultrafine grain(UFG)structure,the precipitation phenomena and microstructural evolutions of Mg-6 Zn-1 Y-0.4 Ce-0.5 Zr(wt.%)alloy processed by sliding friction treatment(SFT)...
the National Key R&D Program of China(No.2017YFB0703104);the National Natural Science Foundation of China(Grant Nos.51771193 and 51931009)。
15 vol.% SiC/Al-6.5Zn-2.8 Mg-1.7 Cu(wt%) composites with varying particle sizes(3.5, 7.0, 14 and 20 μm), i.e., C-3.5, C-7.0, C-14, and C-20, respectively, were fabricated by powder metallurgy(PM) method and subjected...
the National Natural Science Foundation of China(Nos.51831004,51801060,51671082,11427806,51471067);the National Key Research and Development Program of China(No.2016YFB0300801)。
Al-Cu binary alloys are important and interesting industry materials.Up to date,the formation mechanisms of the key strengthening precipitates,namedθ’-phase,in the alloys are still controversial.Here,we report that ...
financially supported by the National Natural Science Foundation for Young Scientists of China(Nos.51801042 and 51704088);the National Natural Science Foundation(Nos.51971075 and 51775150);the Fundamental Research Funds for the Central Universities;the JST Advanced Low Carbon Technology Research;the Development Program(ALCA)(No.12102886)。
The homogenized Mg-8.2 Gd-3.8 Y-1.0 Zn-0.4 Zr(wt.%)alloy full of plate-shaped long period stacking ordered(LPSO)phases was hot extruded in the atmosphere and cooled by the forced-air,then the effect of forced-air cool...
supported by the National Key Research and Development Program of China[2016YFB0301105];the National Key Research and Development Plan[2017YFB0103904]
The effect of the quenching rate after solution treatment on the residual stress and precipitation behavior of a high strength Mg-5 Zn-3.5 Sn-1 Mn-0.5 Ca-0.5 Cu plate is studied.The simulation results show decreasing ...