相关期刊:《Journal of Minerals and Materials Characterization and Engineering》《Journal of Materials Science & Technology》《Journal of Rare Earths》《材料热处理学报》更多>>
The effect of platinum(a rare metal)-aluminide coating parameters on the tensile properties of nickel-based superalloy Rene■80 was evaluated at 871℃.For this purpose,initial layers of platinum with different thickne...
the National Natural Science Foundation of China(No.51575073);International Cooperation Special Project in Science and Technology of China(No.2015DFR70480);Scientific and Technological Research Program of Chongqing,China(Nos.cstc2017jcyjBX0031,cstc2018jszx-cyzdX0126).
Al-containing coatings were prepared on AZ31 magnesium alloy by pack-cementation technology.X-ray diffraction(XRD),backscattered electron imaging(BSEI)and energy dispersive spectroscopy(EDS)were jointly employed to ch...
supported by the National Natural Science Foundation of China (No.51275506)
Three different Ni-Al foams were synthesized by vapor aluminizing with control of aluminizing time. Oxidation tests under 1100 ℃ and compression tests were conducted to evaluate the oxidation resistance and compressi...
supported by the Foundation of Jiangsu Key Laboratory of Advanced Structural Materials and Application Technology (No. ASMA 201403);Cooperative Innovation Fund of Jiangsu Province (No. BY 2014004-09)
In this study, the two kinds of Fe-Al coatings were fabricated by pack aluminizing on low-carbon steel at different temperatures. The corrosion behavior of the Fe-Al coatings in artificial seawater was investigated by...
Projects(CKJB201205,QKJB201202,YJK201307)supported by the Nanjing Institute of Technology,China
The outermost coating with single phase Ni2Al3 was obtained on copper surface by electrodepositing nickel followed by slurry pack aluminizing at 800 °C for 12 h. The oxidation resistance and microstructure of the coa...
Pure titanium samples were aluminized at 950,1025 and 1100 ℃ for 0-6 h in a pack containing 10%Al+5%NaF+85%Al2O3 in mass traction.The aluminized layers formed on the samples were characterized.The kinetic studies i...
financially supported by the National Natural Science Foundation of China (No.51001106);National Basic Research Program of China (No.2012CB625100)
A Cr-modified aluminide coating is prepared on a Ni-based superalloy using arc ion plating and subsequent pack cementation aluminizing.Hot corrosion behavior of the Cr-modified aluminide coating exposed to molten Na2S...
Basic Research Priorities Program of the Science and Technology Committee of Shanghai(03JC14063);Shanghai Leading Academic Discipline Project(J50503);Innovative Program of the Education Commission of Shanghai(11YZ112)
Aluminum was deposited by diffusion into Cu-Al-Y alloy substrates by the pack-cementation process.Diffusion was carried out in two kinds of container with pot-type and can-type,and the results are presented.The effect...
Microstructures,high-temperature oxidation and wear resistance of hot dipping Al-Si-Y coating on SCH12 heat resistant cast steel were investigated in this study.The aluminized coating was characterized by scanning ele...
The preliminary results of research on forming the aluminide coatings using CVD method were presented in the article. The coatings were obtained in low activity process on the surface of Rene 80 superalloy. The micros...