Supported by Startup Fund for Youngman Research at SJTU(SFYR at SJTU);National Basic Research Program of China(Grant No.2011CB012904);China Postdoctoral Science Foundation(Grant No.2013M541517)
High-dispersed nanoscale Cu precipitates often contribute to extremely high strength due to precipitation hardening,and whereas usually lead to degraded toughness for especially ferritic steels.Hence,it is important t...
The authors are grateful to the financial support from the National Basic Research Program of China(Grant no.2013 CB632200);the National Natural Science Foundation of China(Grant no.51574291);the Fund amental Research Funds for the Central Universities of Central South University(Grant no.502220002).
Optical microscope(OM),scanning electron microscope(SEM),transmission electron microscope(TEM)and tensile machine were used to characterize the microstructures and mechanical properties of as-forged and aged Mg-9.5Gd-...
supported by the National Natural Science Foundation of China (NSFC) through Projects No. 51301173, No. 51531002 and No. 51571142;the National Basic Research Program of China (973 Program) through Project No. 2013CB632202
Influence of solute atom concentration and precipitates on serrated flow, i.e., Portevin-Le Chatelier effect, was studied in Mg-3Nd-Zn alloy by tensile test at 250℃ with a strain rate of l x 10^-3 s^-1 Microstructure...
Project supported by the National Nature Science Foundations of China(51464032);the National Basic Research Program of China(2010CB635106)
In this paper, the microstructural evolution, grain refinement and mechanical properties of as-cast Mg-6Zn-0.4Zr alloys with varying Sm contents(0, 2 wt.%, 4 wt.% and 6 wt.%) were investigated by using an optical mi...
funded by the National Basic Research Program of China(No.2013CB632202 and No.51531002);the National Natural Science Foundation of China(No.51301173)
High temperature tensile-creep behavior of Mg-4Y-2.3Nd-IGd-O.6Zr (wt%, WE43(T6)) alloy at 523- 573 K was investigated. The creep stress exponent is equal to 4.6, suggesting the underlying dislocation creep mechani...
Sponsored by National Basic Research Program of China(2010CB630800)
The influence of aging temperature on phase transformation and mechanical properties of weld metal of maraging steel (grade C300) was studied. Microstructure was analyzed by means of optical microscopy, transmission...
Project(2012AA050501)supported by the National High-tech Research and Development Program of China;Project(NY20110102)supported by the National Energy Applied Technology and Engineering Demonstration Program,China;Project(2012CB724401)supported by the National Basic Research Program of China;Project(003)supported by CSEE Youth Science & Technology Innovation,China
The microstructure and mechanical properties of alloy 617 B in the process of 5000 h aging at 750 °C were systematically investigated by means of SEM, TEM and mechanical analysis. M23C6 particles were dispersed insid...
Project(51105139)supported by the National Natural Science Foundation of China;Project(2010CB731706)supported by the National Basic Research Program of China
The precipitation behavior and its influence on the electrical resistivity of the Al-0.96Mg2Si alloy during aging were investigated with in-situ resistivity measurement and transmission electron microscopy (TEM). Th...
Project(2012CB619505)supported by the National Basic Research Program of China
The retrogression kinetics for grain boundary precipitate (GBP) of 7A55 aluminum alloy was investigated by transmission electron microscopy (TEM) observation. The results reveal that the coarsening behavior of GBP...
supported by the National Basic Research Program of China (No. 2011CB606306-2)
By using transmission electron microscopy and electron back-scattered diffraction, the effect of annealing temperature on the precipitation behavior and texture evolution in a warm-rolled interstitial-free high streng...