The combination of natural rubber(NR)with epoxidized natural rubber(ENR)could improve the wet slid resistance,mechanical properties,abrasion resistance and thermo-oxidative aging resistance of NR,which showed importan...
financially supported by the Science and Technology Development Plan of Jilin Province (No. 20210203199SF)。
The toughened poly(L-lactic acid)/poly(butylene succinate-butylene terephthalate)(PLLA/PBST) blend with enhanced melt strength and excellent low temperature toughness and strength was prepared by melt compounding thro...
financially supported by the National Natural Science Foundation of China (Nos. 51525301 and 51903009);the National Key Research & Development Plan (No. 2017YFB0307003);Chinese Scholarship Council for supporting his PhD study in Chimie Paris Tech-PSL Research University, France (No. 202106880002)
Because of its softness,wear resistance,biocompatibility,extremely comfortable human touch,thermoplastic vulcanizate(TPV)comprised of silicone rubber(SiR)and thermoplastic polyurethane(TPU)(SiR/TPU TPV)is especially s...
supported by the National Natural Science Foundation of China[Grant No.51703083];the Project“Fibre materials and products for emergency support and public safety”from Jiangsu New Horizon Advanced Functional Fibre Innovation Center Co.Ltd.[Grant No.2020-fx020026]。
Here,the effects of compatibilization and clay nanoparticles on the gas permeability of nanocomposites of poly-lactic acid(PLA)/thermoplastic starch(TPS)/nanoclay were discussed.TPS and compatibilized PLA/TPS were tai...
by the Major Project of Natural Science Foundation of Zhejiang Province of China(No.LD19E030001);the National Nature Science Foundation of China(No.51903071).
The fully biodegradable polymer blends remain challenges for the application due to their undesirable comprehensive performance.Herei n,remarkable combi nation of superior mechanical performa nee,bacterial resista nee...
financially supported by Development and Promotion of Science and Technology Talents (DPST) (No. 013/2559)
Polylactide(PLA)films blended with poly(butylene adipate-co-terephthalate)(PBAT)were hot melted using a twin screw extruder with the addition of triethyl citrate(TEC)as a plasticizer and toluene diisocyanate(TDI)as a ...
financially supported by the National Natural Science Foundation of China (No. 51633003);State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology (No. OIC-201601006)
In this study, the maleic anhydride (MAH) and styrene (St) dual monomers grafted polypropylene (PP) and poly[styrene-b- (ethylene-co-butylene)-b-styrene] (SEBS), i.e. PP-g-(MAH-co-St) and SEBS-g-(MAH-co-S...
Poly(phenylene oxide)/renewable polyamide 11 (PPO/PA11 20/80) blends toughened with glycidylmethacrylate grafted ethylene-n-octene copolymer (GEOC) were prepared in a co-rotating twin-screwextruder. The reaction betwe...
financially supported by the National Natural Science Foundation of China(No.51503117);the Innovation Foundation for Graduate Students of Shandong University of Science and Technology,China(No.SDKDYC170334)
Fully biodegradable blends with low shape memory recovery temperature were obtained based on poly(lactic acid)(PLA) and poly(propylene carbonate)(PPC). By virtue of their similar chemical structures, in situ c...
Poor interfacial adhesion between biobased thermoplastics and natural fibers is recognized as a major drawback for biocomposites.To be applicable for the large-scale production,a simple method to handle is of importan...