Funded by the Natural Science Foundation of China(No.52109168)。
In order to study the characteristics of pure fly ash-based geopolymer concrete(PFGC)conveniently,we used a machine learning method that can quantify the perception of characteristics to predict its compressive streng...
National Natural Science Foundation of China (No.51474170);Natural Science Foundation of Shaanxi Province (No.2023-JC-YB-312);Key Laboratory Project of Shaanxi Province Educational Committee (No.20JS075)。
A homogenous microstructure of ultrafine-grained (UFG) commercially pure (CP) Ti characterized by equiaxed grains/subgrains with an average grain size of about 150 nm and strong prismatic fiber texture were obtained a...
by the Shenzhen Institute of Information Technology School-Enterprise Collaborative Innovation(No.SZIIT2021KJ057);the High-end Foreign Experts Recruitment Program(No.G2021163004L);the Natural Science Foundation of Guangdong Province(2020A1515011242);the Guangdong International Science and Technology Cooperation Program((No.2021A0505050002);the European Regional Development Grant(No.ASTRA6-6)。
Selective laser melting(SLM)or Laser-based powder bed fusion(LBPF)is gaining much attention for the fabrication of novel materials with complex shapes,improved functionalities,and properties.An attempt has been made t...
Funded by National Natural Science Foundation of China(No.51474170);Natural Science Foundation of Shaanxi Province(No.2016JQ5026);Foundation of Liaoning Province Educational Committee(No.2017LNQN14).
Dynamic compression tests were carried out to investigate dynamic mechanical behavior and adiabatic shear bands in ultrafine grained(UFG)pure zirconium prepared by equal channel angular pressing(ECAP)and rotary swayin...
Funded by National Natural Science Foundation of China(Nos.51474152,51274149,51175363)
The as-cast pure magnesium(Mg), with a purity of 99.99%, was hot-extruded at 300 ℃ to prepare a Mg bar with a diameter of 8 mm. The microstructure and mechanical properties of the sample before and after extrusion we...
Funded by the National Natural Science Foundation of China(No.51465039);Natural Science Foundation of Jiangxi Province(No.20151BAB206041,20161BAB206122);Fund of the State Key Laboratory of Solidification Processing in NWPU(No.SKLSP201508)
The effects of different Bi contents on the properties of Sn solders were studied. The interfacial reaction and growth behavior of intermetallic compounds(IMCs) layer(η-Cu6 Sn5 + e-Cu3 Sn) for various soldering t...
Funded partly by the National Natural Science Foundation of China(No.5043430);Specialized Research Fund for the Doctoral Program of Higher Education of China(No.20116120110012);the Natural Science Foundation of Shaanxi Province of China(No.2010JM6010)
The evolution of hardness homogeneity in commercially pure titanium processed by equal channel angular pressing (ECAP) for up to 4 passes following route C at room temperature using a die of 90° was investigated by...
Funded by National Natural Science Foundation of China(Nos.51002045,51205111);Program for Innovative Research Team(in Science and Technology)in the University of Henan Province(No.2012IRTSTHN007),IRTHPU(No.T2013-4);Opening Project of Henan Key Discipline Open Laboratory of Mining Engineering Materials(No.MEM12-5)
Titanium aluminum carbide (Ti3AlC2 and Ti2AlC) powders were synthesized from TiH2 powders instead of Ti powders as Ti source by a tube furnace under argon atmosphere without preliminary dehydrogenation. 95 wt% pure ...
Pure and F,GeO2-doped silica glass cut from fiber preforms prepared by plasma assisted chemical vapor deposition(PCVD) were investigated by ultraviolet absorption spectroscopy.The ultraviolet absorption characterist...
A new kind of in-situ ceramic consolidation molding process was investigated on the basis of the characteristics of starch swelling in water and gelatinizing when heated. The SiC ceramic suspension containing about 50...