CR-MN

作品数:107被引量:215H指数:7
导出分析报告
相关领域:金属学及工艺一般工业技术更多>>
相关作者:胡本芙高桥平七郎木下博嗣王乐夫李雪辉更多>>
相关机构:北京科技大学华南理工大学北海道大学燕山大学更多>>
相关期刊:更多>>
相关基金:国家自然科学基金国家高技术研究发展计划河北省自然科学基金辽宁省科委基金更多>>
-

检索结果分析

结果分析中...
条 记 录,以下是1-10
视图:
排序:
Investigation into enhanced performance of toluene and Hg^(0) stimulative abatement over Cr-Mn oxides co-modified columnar activated coke
《Journal of Environmental Sciences》2025年第2期88-106,共19页Jiajie Wang Jie Liu Lei Gao Dong Xie Caiting Li Liping Xiang Huiyu Xiong Jiaqi Xie Tianren Zhang Yueguo Pan 
supported by the Scientific Research Project of Hunan Provincial Department of Education (No.22B0458);the National Natural Science Foundation of China (No.52270102).
In this study,a string of Cr-Mnco-modified activated coke catalysts(XCryMn1-y/AC)were prepared to investigate toluene and Hg^(0) removal performance.Multifarious characterizations including XRD,TEM,SEM,in situ DRIFTS,...
关键词:TOLUENE Element mercury Cr-Mn oxides Activated coke 
Development of Ti-V-Cr-Mn-Mo-Ce high-entropy alloys for high-density hydrogen storage in water bath environments
《Rare Metals》2024年第10期5229-5241,共13页Hua-Zhou Hu Hou-Qun Xiao Xin-Cong He Wen-Hao Zhou Xiao-Xuan Zhang Rui-Zhu Tang Jie Li Chuan-Ming Ma Qing-Jun Chen 
supported by National Key R&D Program of China(No.2022YFB3504700);the National Natural Science Foundation of China(No.92061125);Jiangxi Natural Science Foundation(No.20212ACB213009)。
The V-based body-centered cubic(BCC)-type hydrogen storage alloys have attracted significant attention due to their high theoretical hydrogen storage capacity of3.80 wt%.However,their practical application faces chall...
关键词:Hydrogen storage alloys High-entropy alloys BCC structure Heat treatment Ce doping 
Effect of Ca and Ti contents on characteristics of inclusions in Fe-Si-Cr-Mn-Al-Ti-Ca-O melts
《Journal of Iron and Steel Research International》2023年第10期1952-1962,共11页Ren-sheng Li Meng-chuan Li Tong-sheng Zhang Wan-lin Wang 
The financial supports from the National Natural Science Foundation of China(51904346);the Introduce Talents Research Fund of Central South University are greatly acknowledged.
The inclusion characteristics in 55SiCr spring steel with different contents of titanium and calcium were investigated.The chemical compositions of steel samples were detected by inductively coupled plasma optical emi...
关键词:Spring steel INCLUSION Titanium treatment Calcium treatment Thermodynamic calculation 
Cr-Mn-Mo低合金钢中白亮带对力学性能的影响被引量:1
《钢管》2023年第4期41-45,共5页彭杨 靳博颖 姜根锋 赵健明 
对比分析了Cr-Mn-Mo低合金钢连铸坯中白亮带处与附近基体的化学成分,检验了淬火态及调质态Cr-Mn-Mo低合金钢管的显微组织和力学性能,研究了白亮带对材料力学性能的影响。结果表明:白亮带在连铸坯中的化学成分呈负偏析;淬火态时,白亮带...
关键词:低合金钢 Cr-Mn-Mo 电磁搅拌 白亮带 负偏析 
Cr-Mn-Ni-N型奥氏体不锈钢及其焊接工艺研究现状
《金属加工(热加工)》2022年第12期10-16,共7页孙明辉 马青军 黄耀波 孙徕博 肖祥勇 武鹏博 冯家玮 
由于国内镍矿资源一直以来存在分布高度集中、以硫化物型为主且伴生矿种多、难于开采的特点,所以加大节镍型不锈钢的研究和应用工作具有重要意义。通过将Cr-Mn、Cr-Mn-Ni-N及Cr-Mn-N3种类型的节镍或无镍不锈钢的应用进行对比,认为Cr-Mn-...
关键词:节镍 低氮高镍奥氏体不锈钢 焊接工艺 
冷轧压下率对C-Cr-Mn-Si系低合金钢组织和性能的影响被引量:1
《材料热处理学报》2022年第10期151-159,共9页何肖飞 张伟锋 王毛球 闫永明 
为了研究冷轧压下率对C-Cr-Mn-Si低合金钢组织和性能的影响,对其进行了4种冷轧压下率(6%、16%、40%、52%)的冷轧试验。利用光学显微镜、拉伸试验、冲击试验和布氏硬度计等分析了试验钢的组织和性能。结果表明:随着冷轧压下率的增加,试...
关键词:低合金钢 冷轧压下率 组织 力学性能 加工硬化 
热处理渗碳Cr-Mn钢疲劳失效仿真研究被引量:1
《兵器材料科学与工程》2022年第4期101-105,共5页崔兰超 程志强 
河南省科技攻关项目(212102311000)。
用扫描电子显微镜观察18Cr2Ni4WA渗碳Cr-Mn钢硬度和显微组织。用有限元软件建立T型渗碳Cr-Mn钢网格模型,并进行有限元模拟运算和疲劳失效分析,计算渗碳Cr-Mn钢疲劳寿命。结果表明:随淬火温度升高,渗碳Cr-Mn钢硬度不断增加,碳化物渗入基...
关键词:渗碳Cr-Mn钢 热处理 疲劳失效 有限元分析 
Development of Ti_(0.85)Zr_(0.17)(Cr-Mn-V)_(1.3)Fe_(0.7)-based Laves phase alloys for thermal hydrogen compression at mild operating temperatures被引量:7
《Rare Metals》2022年第8期2588-2594,共7页Zi-Ming Cao Pan-Pan Zhou Xue-Zhang Xiao Liu-Jun Zhan Zhi-Fei Jiang Shu-Mao Wang Li-Jun Jiang Li-Xin Chen 
financially supported by the National Key Research and Development Program of China (No. 2019YFB1505100);the National Natural Science Foundation of China (No.U20A20237);Zhejiang Provincial Natural Science Foundation of China (No.LZ21E010002)
Metal hydride with proper hydrogen storage properties is the key component of hydride thermal hydrogen compressor.In this work,Ti_(0.85)Zr_(0.17)(Cr-Mn-V)_(1.3)Fe_(0.7)-based alloys were developed to achieve thermal h...
关键词:ALLOYS HYDROGEN Laves 
无磁钻铤用Cr-Mn-Ni-N系高氮钢平衡凝固相变与析出行为
《金属热处理》2022年第3期173-180,共8页王英虎 郑淮北 白青青 宋令玺 姚斌 王利伟 
借助Thermo-Calc软件对无磁钻铤用Fe-(15~25)Cr-(15~25)Mn-(0~5)Ni-(0~1)Mo-(0~1)N-(0~0.8)C多元系高氮钢在凝固和冷却过程中的相变及析出行为进行研究。使用Thermo-Calc软件中的TCFE9数据库对该钢相图的垂直截面图进行计算,分析了Cr、M...
关键词:无磁钻铤 高氮钢 析出行为 相变 凝固 相图计算 
Ti-Cr-Mn三元系的相关系实验研究被引量:3
《粉末冶金材料科学与工程》2021年第5期419-427,共9页李佳辉 胡汀 蔡格梅 
国家重点研发计划资助项目(2018YFE0306101,2016YFB0701301)。
通过对Ti-Cr-Mn平衡合金进行电子探针(EPMA)和X射线衍射(XRD)分析,构建Ti-Cr-Mn三元系在1 373、1 173和973K的等温截面。结果表明,Cr在TiMn;(Laves C14)中具有很大的固溶度(摩尔分数),在973K约为57.8%,在1 373 K时达到60.5%,由于晶体结...
关键词:Ti-Cr-Mn三元系 平衡合金 相平衡 TiMn 合金 
检索报告 对象比较 聚类工具 使用帮助 返回顶部