FE-NI

作品数:302被引量:874H指数:13
导出分析报告
相关领域:金属学及工艺一般工业技术更多>>
相关作者:李和胜李木森宫建红章靖国曹志强更多>>
相关机构:北京科技大学中南大学哈尔滨工业大学大连理工大学更多>>
相关期刊:更多>>
相关基金:国家自然科学基金国家高技术研究发展计划国家重点基础研究发展计划国家教育部博士点基金更多>>
-

检索结果分析

结果分析中...
条 记 录,以下是1-10
视图:
排序:
Fe-Ni/Boehmite催化剂降解甲基橙废水的研究
《长春师范大学学报》2025年第2期73-76,共4页赵建军 赵保国 贾雷峰 尹紫彤 黄政 朱咸伟 
安徽省大学生创新创业训练计划项目“降解有机废水的生物质基催化剂精准设计及其性能研究”(S202311305084);安徽省大学生创新创业训练计划项目“降解有机废水的Si基催化剂调控机理研究”(S202311305085);安徽省质量工程项目“‘新工科’与工程教育专业认证背景下化工专业实践教学体系的探索”(2023sx125);蚌埠学院校级应用型科研项目“氧化铝粉体在污水处理中的高附加值应用研究”(2024YYX30pj)。
利用浸渍法制备了一系列Fe-Ni/Boehmite催化剂,考察了催化剂组成以及反应温度、H_(2)O_(2)用量、反应时间等条件对催化剂降解甲基橙废水性能的影响。结果表明,当每克Boehmite载体负载Fe和Ni的质量比为6∶4,且二者总质量为0.06 g时,催化...
关键词:Fe-Ni/Boehmite催化剂 降解 甲基橙废水 
Fe-10Ni-10Cr-xAl-1Si合金预氧化组织和抗高温氧化研究
《热加工工艺》2025年第4期89-95,104,共8页赵锦毓 吴长军 刘亚 苏旭平 
国家自然科学基金资助项目(51871037)。
研究了Fe-10Ni-10Cr-xAl-1Si(x=0,2,4,6wt%)合金在1000℃和10^(-20)atm氧气压力下的氧化行为,通过循环氧化实验测试了其高温抗氧化性。结果表明,当不添加铝时,氧化合金表面形成连续的Cr_(2)O_(3)膜,最外层为少量FeCr_(2)O_(4)尖晶石,内...
关键词:预氧化 Fe-Ni-Cr-Al-Si 氧化薄膜 循环氧化 
Hierarchical nanostructure stabilizing high content coherent nanoprecipitates in Al-Cr-Fe-Ni-V high-entropy alloy
《Journal of Materials Science & Technology》2024年第33期61-68,共8页Linjing Wang Yao Xiao Yang Ren Lu Wang Liang Wang Yunfei Xue 
supported by the National Na-ture Science Foundation of China(Nos.U2241234,52201152,and 52301127);the China Postdoctoral Science Foundation(No.2022M720150);the Advanced Photon Source at Argonne National Laboratory was supported by the US Department of En-ergy(No.DE-AC02-06CH11357).
High-density coherent nanoprecipitates have been widely introduced into the design of new structural materials to achieve a superior strength-ductility balance.However,the thermal instability of nanostructures limits ...
关键词:High-entropy alloys Hierarchical nanostructure Microstructural stability 
Doping-driven dual heterogeneous interfacial structures boosting the durability of industry-compatible water splitting at high current density
《Science China Chemistry》2024年第10期3468-3481,共14页Chunming Yang Lihai Zhou Zhijie Kong Xiang Li Wangchuan Zhu Guangqing Wang Yanzhong Zhen Feng Fu Yucang Liang 
supported by the National Natural Science Foundation of China(22162025,22068037);the Youth Innovation Team of Shaanxi Universities;the Open and Innovation Fund of Hubei Three Gorges Laboratory(SK232001);the Regional Innovation Capability Leading Program of Shaanxi(2022QFY07-03,2022QFY07-06);the Shaanxi Province Training Program of Innovation and Entrepreneurship for Undergraduates(S202210719108)。
Developing highly stable electrocatalysts under industry-compatible current densities(>500 mA cm^(-2))in an anion-exchange membrane water electrolyzer(AEMWE)is an enormous challenge for water splitting.Herein,based on...
关键词:doping-induced heterojunction structure NiSe/Fe-Ni(OH)_(2) large current density anion-exchange membrane industrycompatible water electrolysis 
Upcycling electroplating sludge into bioengineering-enabled highly stable dual-site Fe-Ni_(2)P@C electrocatalysts for efficient oxygen evolution
《Nano Research》2024年第8期6984-6992,共9页Jiawen Liu Zunpeng Zuo Feng Gao Kai Yi Jiahui Lin Mengye Wang Zhang Lin Feng Huang 
supported by the National Natural Science Foundation of China(Nos.21905317 and U23B20166);the Young Elite Scientists Sponsorship Program by CAST(No.2019QNRC001);the Fundamental Research Funds for the Central Universities,Sun Yat-sen University(No.76180-31620007).
The advancement of bimetallic catalysts holds significant promise for the innovation of oxygen evolution reaction(OER)catalysts.Drawing from adsorbate evolution mechanism(AEM)and lattice oxygen oxidation mechanism(LOM...
关键词:oxygen evolution reaction dual active sites adsorbate evolution mechanism lattice oxygen mechanism BIOENGINEERING 
纳米片状Fe-Ni_(3)S_(2)的制备及其析氧性能研究
《长春师范大学学报》2024年第8期93-98,共6页李秋 吴方 葛金龙 秦英月 易孟 
蚌埠学院高水平科研培育项目“镍铁基MOFs的制备及其OER性能研究”(2021pyxm08);蚌埠学院高层次人才科研启动项目(BBXY2021KYQD04);蚌埠学院自然科学研究重点项目(2022ZR04zd)。
以泡沫镍为基底和镍源,利用一步水热硫化方法,制备出具有自支撑特点的铁掺杂的Ni_(3)S_(2)纳米片。利用XRD、SEM、Raman等测试手段对系列催化剂的结构、形貌进行表征分析,并测试其析氧活性。相比于单一的Ni_(3)S_(2),铁掺杂的Ni_(3)S_(2...
关键词:析氧反应 Ni_(3)S_(2) 电解水 水热制备 铁掺杂 
退火温度对Al-Co-Fe-Ni共晶高熵合金组织性能的影响
《铸造技术》2024年第7期639-646,共8页聂帅 刘浩翔 武宇浩 刘栩东 贺一轩 王军 李金山 
上海市扬帆计划(21YF1450800);西安市科协青年人才托举计划(W021009)。
良好的延展性是合金成形能力的重要影响因素,尽管共晶高熵合金具有良好的铸造性能,但有限的延展性限制了其实际应用。本文采用热轧和退火工艺来克服共晶高熵合金这一问题,探究热轧后不同退火温度对Al21.5Co19.5Fe9.5Ni50共晶高熵合金微...
关键词:共晶高熵合金 退火温度 力学性能 相变表征 变形机制 
Simultaneously improved the strength and ductility of laser powder bed fused Al-Cr-Fe-Ni-V high-entropy alloy by hot isostatic pressing:Microcrack closure and precipitation strengthening
《Journal of Materials Science & Technology》2024年第13期55-68,共14页Ziwei Liu Zhen Tan Dingyong He Zheng Zhou Xingye Guo Wei Shao Haihua Yao Yunfei Xue Li Cui 
National Natural Science Foundation of China(Grant Nos.51901004,52001025,and 52171060);State Key Laboratory of Powder Metallurgy,Central South University,Changsha,China.
Hot isostatic pressing(HIP)is usually applied to reduce the defects including cracks and pores in the materials prepared by laser powder bed fusion(LPBF).In the present research,in order to improve the relative densit...
关键词:High-entropy alloy Laser powder bed fusion Hot isostatic pressing Crack closure Precipitation strengthening 
不烧滑板磨削加工用Fe-Ni-Cu-Sn金属基金刚石工具的制备与性能被引量:2
《材料导报》2024年第10期175-181,共7页呼丹明 段锋 丁冬海 李杰 尹育航 彭凯 
Al_(2)O_(3)-C不烧滑板作为连铸功能耐火材料在炼钢领域中受到广泛应用,而金属结合剂金刚石工具在滑板磨削加工中起到关键作用。本工作通过热压烧结法制备Fe-Ni-Cu-Sn金属基胎体和Fe-Ni-Cu-Sn金属基金刚石工具,首先研究烧结温度、保温...
关键词:烧结工艺 金刚石磨料 不烧滑板 磨削性能 
热机械处理Al-Co-Fe-Ni共晶高熵合金组织性能研究
《铸造技术》2024年第4期335-341,共7页金妮 刘浩翔 武宇浩 刘栩东 贺一轩 王军 李金山 
上海市扬帆计划项目;西安市科协青年人才托举计划项目;凝固技术国家重点实验室基金(2022-TS-08)。
共晶高熵合金具有优异的强塑性匹配,同时还兼具传统共晶合金良好的铸造性能,对高熵合金的实际化应用有着重大的意义。而如何进一步提升共晶高熵合金的强塑性能,成为了高熵合金领域的研究热点。本文以Al-(21)Co_(19.5)Fe_(9.5)Ni_(50)共...
关键词:共晶高熵合金 热机械处理 力学性能 相变表征 变形机制 
检索报告 对象比较 聚类工具 使用帮助 返回顶部