相关期刊:《Journal of Rare Earths》《Journal of Wuhan University of Technology(Materials Science)》《Friction》《International Journal of Minerals,Metallurgy and Materials》更多>>
The aim of this work is to establish the influence of the relative position of the alloy charge C-Cr-Mn in the structure of the coating of rutile electrodes for hardfacing,on the operational behavior(arc stability).Fo...
This study presents a simple process to deposit a hardfacing coating on a steel substrate, based on the sintering of metallic powder applied by tape casting (by a slurry of metallic powder suspension onto a steel subs...
Hardfacing coatings involve hard carbide/boride phases dispersed in a relatively soft steel matrix.For the hardness measurements of hardfacing coatings,depending on the microstructure,both the hardness test method and...
This paper presents the use of computed tomography for the evaluation of hardfacing. The method used in this research is hardfacing by tungsten inert gas using alloy wires of wear resistant layers. This paper discusse...
This study was focused on wear-resistant material prepared by CO2 GMAW method to basically determine the alloys and hardfacing technology which could be employed into mining equipment. Three flux-cored wires with diff...
supported by National Natural Science Foundation of China(51271163,51471148)
The Fe-Cr-C flux-cored wires with 0 wt.%, 0.63 wt.%, 2.54 wt.% and 5.08 wt.% additions of nano-Y203 were developed in this work. And the different hypereutectic Fe-Cr-C hardfacing coatings were prepared. The phase str...
the Armament Research Board(ARMREB), New Delhi,Government of India for providing financial support to carry out this investigation through a research and development project, No.ARMREB/MAA/2008/93
Armour grade quenched and tempered steel closely confirming to AISI 4340 is well known for its superior ballistic performance and hence used in the fabrication of combat vehicles. The traditional fillers like austenit...
the Armament Research Board (ARMREB), Directorate of Armaments, Ministry of Defence, New Delhi, Government of India for providing financial support to carry out this investigation through a R&D project, No. ARMREB/MAA/2008/ 93
This study was carried out to evaluate the effect of hardfacing consumables on ballistic performance of armour grade quenched and tempered(Q&T)steel welded joints.To evaluate the effect of hardfacing consumables,joint...
Item Sponsored by National Natural Science Foundation of China (51101050);Fundamental Research Funds for Central Universities of China (2009B30214);Natural Science Foundation of Jiangsu Province of China (BK2011257)
It is expected that the welding hardfacing of continuous casting rolls has better welding performance and higher wear resistance. A new type of submerged-arc hardfacing flux-cored wire has been developed through nitro...
Project supported by One Hundred Excellent Talents of Hebei Province of China and Key Project of Science and Technology of Hebei Province (09215106D)
The flux cored wires with different amounts of rare earth (RE) oxides additions for hardfacing (harden-face-welding) the workpieces of high chromium cast iron were studied in this work.The morphology of carbides i...