云南高校图书馆联盟文献共享服务平台- M6C

M6C: 作品数：18被引量：61H指数：5; 导出分析报告; 相关领域：金属学及工艺一般工业技术更多>>; 相关作者：杨钢谢君孙晓峰于金江袁有录更多>>; 相关机构：钢铁研究总院昆明理工大学中国科学院金属研究所湖北汽车工业学院更多>>; 相关期刊：《冶金分析》《特钢技术》《金属学报》《理化检验（物理分册）》更多>>; 相关基金：国家自然科学基金国家高技术研究发展计划国家重点基础研究发展计划更多>>

高钨镍基高温合金K416B富W相的析出行为被引量：6: 《金属学报》2021年第2期215-223,共9页朱玉平盛乃成谢君王振江荀淑玲于金江李金国杨林侯桂臣周亦胄孙晓峰; 国家自然科学基金项目No.51971214;中国科学院引才计划项目No.51771191;中国科学院轻型动力创新研究院创新引导基金项目No.CXYJJ20-QN-02。; 研究了K416B合金中富W相的析出行为与合金浇注温度和凝固速率的关系。结果表明,在相同冷却速率下,合金的浇注温度由1500℃降低到1450℃时,晶粒尺寸明显减小。在不同浇注温度下,合金中均有块状α-W相在残余共晶中析出,α-W相形貌差别不...; 关键词：镍基高温合金富W相 α-W M6C 凝固速率

Evolution of precipitates in Ni-Co-Cr-W-Mo superalloys with different tungsten contents被引量：5: 《Rare Metals》2020年第6期716-724,共9页Han-Sheng Bao Zhi-Hua Gong Zheng-Zong Chen Gang Yang; financially supported by the National Key Research and Develop Program,China(No.2017YFB0305203)。; The Ni-Co-Cr-W-Mo system is critical for the design of nickel-based superalloys.This system stabilizes different topologically close-packed(TCP)phases in many commercially superalloys with high W and Mo contents.Scann...; 关键词：Nickel-based superalloys M6C μphase Long-time exposure M12C

Carbide dissolution and austenite grain growth behavior of a new ultrahigh-strength stainless steel被引量：5: 《Journal of Iron and Steel Research International》2020年第6期732-741,共10页Zhen-bao Liu Xin Tu Xiao-hui Wang Jian-xiong Liang Zhi-yong Yang Yong-qing Sun Chang-jun Wang; The authors gratefully acknowledge the support from the National Key Research and Development Program of China(2016YFB0300104).; The isothermal grain growth behavior for a new ultrahigh-strength stainless steel (UHSSS) is investigated in temperature range from 900 to 1150 ℃ and holding time range from 0 to 20 min. In the temperature range from...; 关键词：Ultrahigh-strength stainless steel Austenite grain growth Mathematical model M6C particle

冷处理对16Cr14Co12Mo5Ni2轴承钢中M_6C型碳化物的影响被引量：4: 《材料热处理学报》2019年第5期96-102,共7页何潇吕新杨吴志伟赵昆渝杨卯生; 国家高技术研究发展"863"计划资助项目(201203A503); 采用扫描电镜及透射电镜等研究了16Cr14Co12Mo5Ni2低碳高合金轴承钢经-80、-196℃分别冷处理2 h与4 h并回火后其碳化物的数量、形态、分布以及基体与碳化物中元素分布特征。结果表明:经-80℃、-196℃分别冷处理2 h与4 h并回火后钢中主...; 关键词：冷处理高合金轴承钢 M6C

Effects of solution treatment on grain coarsening and hardness of laser welds in UNS N10003 alloy contained different carbon content被引量：2: 《Journal of Materials Science & Technology》2019年第8期1719-1726,共8页Kun Yu Xianwu Shi Zhenguo Jiang Chaowen Li Shuangjian Chen Wang Tao Xingtai Zhou Zhijun Li; supported by the National Key Research and development program of China (2016YFB0700404);the National Natural Science (Grant Nos. 51371188, 51671122, 51671154, 51501216 and 51601213);the Strategic Priority Research Program of the Chinese Academy of Sciences (Grant No. XDA02004210); Microstructure and microhardness evolution of laser welds in low carbon UNS N10003 alloy(LC alloy)and high carbon UNS N10003 alloy(HC alloy)before and after solution treatment have been characterized and investigated ...; 关键词：MOLTEN salt reactor Nickel base ALLOY LASER welding M6C Grain COARSENING

不同Mo、W含量叶片用GY200镍基合金中碳化物的析出行为被引量：6: 《材料热处理学报》2017年第9期83-88,共6页龚志华杨钢马龙腾定巍; 国家重点研发计划项目(2016YFB0300203); 利用微观组织分析及化学相分析的方法研究了9种不同Mo、W含量的汽轮机叶片用GY200镍基合金中碳化物及γ'强化相的析出规律。结果表明,合金中出现MC、M_6C、M_(23)C_6型碳化物,MC相由一次未溶TiC和少量二次析出的TiC组成,MC相含量随W、M...; 关键词：GY200 镍基合金 M23C6 M6C 动力学

退火工艺对AMS 6308钢硬度及组织的影响被引量：7: 《钢铁研究学报》2016年第4期58-63,共6页彭涛赵吉庆曹建春杨钢; 国家科技部863计划资助项目(2012AA03A501); 利用扫描电镜、透射电镜和硬度测试等方法研究了不同退火工艺对AMS 6308钢硬度及组织的影响。结果表明,提高退火温度,马氏体板条内位错密度降低,M6C的尺寸逐渐增加,硬度下降,但在750℃以上退火,进入二相区,空冷后产生二次马氏体,硬度回...; 关键词：退火工艺 AMS 6308 退火硬度 M6C

Thermodynamics analysis and precipitation behavior of fine carbide in K416B Ni-based superalloy with high W content during creep被引量：5: 《Transactions of Nonferrous Metals Society of China》2015年第5期1478-1483,共6页谢君于金江孙晓峰金涛; Projects(2010CB631200,2010CB631206)supported by the National Basic Research Program of China;Project(50931004)supported by the National Natural Science Foundation of China; The precipitation behavior of carbide in K416 B superalloy was investigated by means of creep measurement and microstructure observation. The results show that nanometer M6 C particles discontinuously precipitate in t...; 关键词：K416B Ni-based superalloy M6C carbide stress inducement thermodynamics analysis

Ni60A+WC增强Fe基梯度涂层中M_6C颗粒的析出特征研究(英文)被引量：3: 《稀有金属材料与工程》2013年第S2期483-486,共4页袁有录李铸国; National Natural Science Foundation of China(51171116);Ministry of Science and Technology of the People's Republic of China(Grant No.2009DFB50350);Research Foundation of Education Bureau of Hubei Province,China(Grant No.Q20122304);Doctoral Starting up Foundation of Hubei Universityof Automotive Technology,China(Grant No.BK201205); 以Fe30自熔合金粉末和镍包覆碳化钨粉末(Ni60A+WC)为原料,利用等离子熔覆工艺在Q235表面制备了Ni60A+WC增强Fe基多层梯度涂层。研究了铁基涂层中"富钨"型碳化物M6C的析出特征。结果表明,梯度涂层中析出的"富钨"型碳化物特征与Ni60A+WC...; 关键词：析出 M6C WC 碳化物梯度涂层

淬火温度对AMS 6308钢组织和性能的影响被引量：12: 《特钢技术》2012年第3期12-17,共6页刘宝锋杨钢华建社杨沐鑫; 研究了淬火处理(900℃～1010℃)对AMS6308钢(wt.%:0.1C、1.0Cr、1.97Ni、3.25Mo、2.0Cu、0.08V、0.83Si、Fe余量。)微观组织和力学性能的影响,结果表明,试验钢在915℃×0.5h油冷+(-80℃)×1h+205℃×2h回火后得到最佳的力学性能(Rm=1135...; 关键词：AMS6308钢淬火温度 M6C沉淀相力学性能

M6C