MG-GD-Y

作品数:161被引量:526H指数:11
导出分析报告
相关领域:金属学及工艺一般工业技术更多>>
相关作者:潘复生邓运来张治民王敬丰唐昌平更多>>
相关机构:重庆大学中南大学中北大学哈尔滨工业大学更多>>
相关期刊:更多>>
相关基金:国家自然科学基金国家重点基础研究发展计划湖南省自然科学基金山西省自然科学基金更多>>
-

检索结果分析

结果分析中...
条 记 录,以下是1-10
视图:
排序:
Mg-Gd-Y-Sm-Ag-Zr合金显微组织及性能研究
《现代交通与冶金材料》2025年第2期117-122,共6页姚茂海 罗天纵 陈辰 王远顺 谢文 吕晶 代旺 
长沙市技术及产品开发项目(kh2201394)。
结合XRD、DTA、金相分析研究了固溶时效工艺对Mg-Gd-Y-Sm-Ag-Zr合金显微组织结构、时效硬化特性及力学性能的影响。结果表明,Mg-Gd-Y-Sm-Ag-Zr合金最佳固溶时效条件为480℃/6 h,210℃/28 h;Sm和Ag复合添加能够提升铸态和时效态Mg-Gd-Y-Z...
关键词:Mg-Gd-Y-Sm-Ag-Zr 显微组织 力学性能 固溶时效 
时效处理对热挤压态Mg-Gd-Y-Sm-Zr合金组织和性能的影响
《金属热处理》2025年第3期9-15,共7页兖利鹏 孙瑞雪 马秉馨 付靖 苏光 李全安 郑鸿江 
国基自然科学基金(52371108);河南省科技攻关项目(232102220091,242102240056);河南工学院博士科研启动金(KQ2426)。
用扫描电镜(SEM)、透射电镜(TEM)、电子背散射衍射(EBSD)、硬度试验和拉伸试验等研究了时效对热挤压态Mg-8Gd-4Y-1Sm-0.5Zr(GWS841)合金组织和性能的影响。结果表明,热挤压态GWS841合金的峰值硬度时效工艺分别为200℃×96 h、225℃×24 ...
关键词:Mg-8Gd-4Y-1Sm-0.5Zr合金 时效处理 硬度 显微组织 强化机制 
复合硅烷膜及双层硅烷膜对Mg-Gd-Y稀土镁合金耐蚀性的影响
《上海航天(中英文)》2025年第1期102-109,共8页谢陈凯 金建港 张立军 林才渊 
国家自然科学基金资助项目(52405391)。
针对镁合金耐蚀性方面的劣势,基于Mg-Gd-Y稀土镁合金的存储期及工序间腐蚀问题,利用硅烷化表面处理技术以提高镁合金耐蚀性。在传统单一硅烷膜的基础上,开发了多种硅烷复合而成的复合硅烷膜和双层硅烷膜,对其膜层结构做出了解释,并用电...
关键词:硅烷化 稀土镁合金 耐蚀性 复合膜 表面处理 
High strength and high ductility Mg-Gd-Y-Zn-Zr alloys obtained by controlling texture and dynamic precipitation through LPSO phase structure of different initial morphologies
《Journal of Rare Earths》2024年第12期2217-2230,I0002,共15页Yayun He Rui Guo Xi Zhao Zhimin Zhang 
Project supported by the Innovative Talents Support Program of Higher Education Institutions in Shanxi Province;financial support from the North University of China Project of Science and Technology in 2022(20221878).
This paper investigated the effects of three different initial phase structures on the microstructure evolution and tensile properties of extruded Mg-Gd-Y-Zn-Zr alloy,using an extrusion ratio of 3.6.These three initia...
关键词:Mg-Gd-Y-Zn-Zr alloy Recrystallization behavior Mechanical property Rare earths 
Mg-Gd-Y-Zn-Zr镁合金的LPSO相演化及其强化机制
《塑性工程学报》2024年第12期185-194,共10页张林林 郭俊卿 董帅 皇涛 陈拂晓 
国家自然科学基金资助项目(51905156);河南省高等学校重点项目(20A460014);河南省自然科学基金优秀青年基金资助项目(202300410122);浙江省科技计划项目(2022C01081)。
为了研究LPSO相对镁合金力学性能的影响,选取挤压态Mg-8.24Gd-2.79Y-1.97Zn-0.52Zr镁合金为研究对象,通过热处理工艺获得了不同形貌和体积分数的LPSO相,采用光学显微镜、扫描电镜、能谱仪和电子拉伸试验机等研究了Mg-Gd-Y-Zn-Zr镁合金...
关键词:Mg-Gd-Y-Zn-Zr合金 LPSO相 微观组织 力学性能 强化机制 
Twinning behavior of an extruded Mg-Gd-Y-Zn-Zr alloy sheet under tension and compression
《Journal of Rare Earths》2024年第12期2208-2216,I0001,共10页Jianfen Huang Tao Chen Wugui Jiang Longhui Mao Zhiyong Chen 
Project supported by National Natural Science Foundation of China(52304402);Jiangxi Provincial Natural Science Foundation(20232BAB214058,20224BAB214044)。
In this study,twinning behaviors of an extruded Mg-4.7Gd-3.4Y-1.2Zn-0.5Zr(wt%)alloy sheet along different directions extrusion direction(ED),45°:45°to ED and transverse direction(TD)under tension and compression wer...
关键词:Magnesium alloy Texture Twinning behavior ANISOTROPY Rare earths 
Mg-Gd-Y-Sm-X-Zr(X=La、Ce、Sr、Sb)合金显微组织及性能研究
《稀有金属与硬质合金》2024年第5期27-33,共7页姚茂海 邱东东 罗天纵 熊爱虎 吕晶 李杰 代旺 
长沙市技术及产品开发项目(kh2201394)。
以纯镁及镁基中间合金为原材料制备Mg-Gd-Y-Sm-X-Zr(X=La、Ce、Sr、Sb)合金,采用维氏硬度计、电感耦合等离子体原子发射光谱仪、金相显微镜、扫描电子显微镜和拉伸测试试验机等设备对试样进行测试。研究了Mg-Gd-Y-Sm-X-Zr(X=La、Ce、Sr...
关键词:稀土镁合金 Mg-Gd-Y-Sm-La-Zr 显微组织 固溶 时效 力学性能 
Nanomechanics of Mg-Gd-Y-Nd-Zn alloy with LPSO and MgRE phases
《Journal of Magnesium and Alloys》2024年第8期3370-3393,共24页H.Vafaeenezhad S.Aliakbari-Sani A.Kalaki G.R.Ebrahimi J.Hirsch 
The mechanical properties of two main precipitating phases(LPSO and MgRE)and matrix in Mg-Gd-Y-Nd-Zn bioalloy were examined using nanoindentation method.A new is suggested for characterizing the elastic-plastic behavi...
关键词:Long period stacking ordered(LPSO)phase NANOINDENTATION Elastic-plastic behavior Finite element method(FEM) Fracture toughness Strain rate sensitivity(SRS) 
热轧变形量对Mg-11.8Gd-2.3Y-0.5Zr-0.5Ag-0.4Er合金显微组织及力学性能的影响被引量:1
《中国有色金属学报》2024年第7期2215-2226,共12页蒋文天 王若愚 彭健 刘华山 
以Mg-11.8Gd-2.3Y-0.5Zr-0.5Ag-0.4Er(质量分数,%)合金为实验材料,研究了热轧变形量对组织演变和性能的影响。结果表明:当热轧变形量从20%增至40%时,非基面滑移系施密特因子增加,孪晶减少;继续增大热轧变形量,非基面滑移系的平均施密特...
关键词:Mg-Gd-Y基合金 热轧 织构 位错滑移 孪生 强化机制 
Solid state recycling of Mg-Gd-Y-Zn-Zr alloy chips by isothermal sintering and equal channel angular pressing
《Journal of Magnesium and Alloys》2024年第7期2725-2740,共16页Yanbo Pei Hongjun Ma Meng Yuan Bugang Teng 
supported by the fund of the National Natural Science Foundation of China(51875127,52275322).
The Mg-7Gd-4Y-2Zn-0.5Zr alloy chips were successfully recycled through isothermal sintering and equal channel angular pressing(ECAP).The mechanical properties and microstructure evolution of samples during the recycli...
关键词:Mg-Gd-Y-Zn-Zr alloy Solid state recycling Microstructure evolution LPSO phase Equal channel angular pressing 
检索报告 对象比较 聚类工具 使用帮助 返回顶部