Project(51271051)supported by the National Natural Sciecne Foundation of China
The B4C/Mg composites fabricated by metal-assisted pressureless infiltration technique were used as experimental material, and the wear behavior and mechanism of this material were studied. A pin-on-disc apparatus was...
Project (2012BAE06B01) supported by the Key Technology R&D Program During the 12th Five-Year Plan Period, China;Projects(21201030, 51272039, 51032007) supported by the National Natural Science Foundation of China;Project (1099043) supported by the Science and Technology in Guangxi Province, China
The dry friction and wear behaviors of co-continuous composites SiC/Fe–40Cr against SiC/Al 2618 alloy were investigated on a ring-on-ring friction and wear tester at sliding speed of 30-105 m/s under the load of 1.0-...
Projects (50872018, 50902018) supported by the National Natural Science Foundation of China;Project (1099043) supported by the Science and Technology in Guangxi Province, China;Project (090302005) supported by the Basic Research Fund for Northeastern University, China
The mass of high-speed trains can be reduced using the brake disk prepared with SiC network ceramic frame reinforced 6061 aluminum alloy composite (SiCn/Al). The thermal and stress analyses of SiCn/Al brake disk dur...
Project(2009BAE80B01)supported by the Ministry of Science and Technology,China
Aluminium matrix composite reinforced by Al2O3 particles was produced by adding NH4AlO(OH)HCO3 into molten aluminum.The mechanical properties and wear behavior of the as-fabricated composites were studied.The result...
Project(2008BAB34B01-1)supported by the National Key Technology R&D Program of China
The reduction smelting process for cobalt recovery from converter slag of the Chambishi Copper Smelter in Zambia was studied. The effects of reducing agent dosage, smelting temperature and time and the addition of sla...
Project(2009BAE80B01) supported by the Key Projects in the National Science and Technology Pillar Program During the11th Five-Year Plan Period,China
The influence of some additives on bulk density,phase composition,mechanical strength and thermal shock resistance of aluminium titanate (AT) ceramics was investigated.AT ceramics with different additives of MgO,SiO...