王晶

作品数:4被引量:38H指数:3
导出分析报告
供职机构:中国科学院金属研究所更多>>
发文主题:合金铸态镁合金含锡铸造镁合金更多>>
发文领域:金属学及工艺一般工业技术冶金工程更多>>
发文期刊:《金属学报》《Transactions of Nonferrous Metals Society of China》更多>>
所获基金:国家科技支撑计划山东省自然科学基金国际科技合作与交流专项项目国家重点基础研究发展计划更多>>
-

检索结果分析

署名顺序

  • 全部
  • 第一作者
结果分析中...
条 记 录,以下是1-4
视图:
排序:
Hot compression behavior and processing map of cast Mg-4Al-2Sn-Y-Nd alloy被引量:6
《Transactions of Nonferrous Metals Society of China》2014年第3期626-631,共6页王晶 史宝良 杨院生 
Project(2011BAE22B01-1)supported by the National Key Technology R&D Program;Project(2011DFA50903)supported by the International Science&Technology Cooperation Program of China
The plastic flow behavior of a newly developed high ductility magnesium alloy, Mg-4Al-2Sn-Y-Nd, was investigated by hot compression from 200 to 400 ℃ with a strain rate of 1.5×10-3 to 7.5 s-1. The results reveal tha...
关键词:magnesium alloy uniaxial compression apparent activation energy processing map 
低温挤压Mg-4Zn-2Al-2Sn合金的组织与力学性能研究被引量:25
《金属学报》2014年第1期41-48,共8页赵东清 周吉学 刘运腾 董旭光 王晶 杨院生 
国家支撑计划项目2011BAE22B01-1;国家国际科技合作计划项目2011DFA50903;山东省自然科学基金项目ZR2010EQ021资助~~
研究了Mg-4Zn-2A1-2Sn合金在225,250和275℃挤压变形后的微观组织、织构及其力学性能.结果表明:在3种挤压温度下合金均发生了完全动态再结晶,晶粒尺寸分别为4.4,7.1和10.5μm.挤压温度直接影响到晶粒内部第二相的析出,在225℃挤压时,在...
关键词:镁合金 低温挤压 组织 力学性能 
Hot compression behavior and deformation microstructure of Mg-6Zn-1Al-0.3Mn magnesium alloy被引量:4
《Transactions of Nonferrous Metals Society of China》2013年第9期2560-2567,共8页史宝良 罗天骄 王晶 杨院生 
Project(2011BAE22B01-1)supported by the National Key Technologies R&D Program of China;Project(2011DFA50903)supported by the International S&T Cooperation Program of China
The hot compression behavior of a wrought Mg-6Zn-1Al-0.3Mn magnesium alloy was investigated using Gleeble test at 200-400 °C with strain rates ranging from 0.01 to 7 s-1. The true stress-strain curves show that the h...
关键词:wrought magnesium alloy hot compression STRESS STRAIN RECRYSTALLIZATION 
Bi对AZ80镁合金凝固行为及显微组织的影响被引量:3
《金属学报》2011年第4期410-416,共7页王亚霄 付俊伟 王晶 罗天骄 董旭光 杨院生 
国家重点基础研究发展计划资助项目2007CB613705~~
采用加热-激冷方法和OM,SEM,XRD,DSC等分析手段,研究了AZ80-Bi镁合金的凝固行为,分析了合金的凝固组织特征及其演变过程,阐明了合金的凝固序列.AZ80-2%Bi(质量分数)合金的铸态显微组织由α-Mg,β-Mg_(17)Al_(12)和Mg_3Bi_2相组成,其中Mg...
关键词:AZ80镁合金 BI 凝固序列 共晶转变 
检索报告 对象比较 聚类工具 使用帮助 返回顶部