一种纯滞后过程的串级双环状态反馈优化设计方法  

Optimization Design of Cascade Control System with State Feedback for Pure Delay Processes

作　　者：陈一秀[1] 王永初[1] 

机构地区：[1]华侨大学机电及自动化学院,泉州362011

出　　处：《仪器仪表学报》2005年第4期391-394,共4页Chinese Journal of Scientific Instrument

摘　　要：纯滞后对象是一种很难控制的对象。文中采用串级双环状态反馈控制,使这种对象获得较理想的控制品质。系统的设计方法包括:采用数值逼近方法将对象拟合成有理多项式,并选择一种近乎理想的最优低通滤波器作为串级系统内外环的参考模型;根据串级内、外环不同结构分别采用开环和闭环校正,并引入状态观测器,大幅度地减少状态的检测数量;同时采用内外环系统的协调设计,拉开内外环回路的操作频率,有利于提高系统的鲁棒性。通过仿真实验,证实该方法相当有效。Pure delay processes are quite difficult to control. A kind of cascade control system with state feedback is presented for pure delay processes. With this control method, the delay plants can possess good control performance. First, the pure delay factor is fit to a rational polynomial with numerical approximation. Then a nearly ideal optimal low-pass filter is used as reference model for interloop and outloop compensation of the cascade system. The state observer is also designed to reduce the detecting number of system states. The codesign of the interloop and outloop of the system is also used by rationally adjusting the operation frequencies to improve the robustness of the system. The simulation results show that the method is quite effective.

关 键 词：优化设计方法 纯滞后过程 双环 状态反馈控制 纯滞后对象 有理多项式 低通滤波器 状态观测器 控制品质 逼近方法 参考模型 串级系统 闭环校正 协调设计 操作频率 仿真实验 外环 大幅度 鲁棒性 理想 数值 最优 

分 类 号：TP273[自动化与计算机技术—检测技术与自动化装置] TS254.3[自动化与计算机技术—控制科学与工程]