检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]西南交通大学牵引动力国家重点实验室,四川成都610031
出 处:《系统仿真学报》2008年第20期5718-5721,共4页Journal of System Simulation
基 金:国家自然科学基金项目(50405028);新世纪优秀人才支持计划(NCET-06-0803);四川省"天府英才"工程
摘 要:利用Solidworks、ANSYS以及SIMPACK软件,建立了包含车辆、控制系统和弹性悬浮架的高速磁浮车辆刚弹性动力学模型,仿真分析了车辆以250km/h速度通过半径2260m平面曲线时弹性悬浮架的动态响应。结果表明,在线路扭转最为剧烈的缓和曲线中点,悬浮架弹性变形最大,其弹性扭转角最大约0.125°,悬浮臂最大垂向变形为0.44mm;悬浮架弹性变形主要在缓和曲线上得到反映,在圆曲线段上近似为一较小值,扭转变形方向在前、后缓和曲线上刚好相反。弹性悬浮架的动态响应规律与曲线通过理论是吻合的,表明磁浮车辆刚弹性动力学仿真模型是合理的。Using the Solidworks,ANSYS and SIMPACK software,a complete rigid-elastic dynamic model of high-speed maglev vehicle system was set up,including the vehicle,the controller and the elastic levitation chassis. Dynamic responses of the elastic levitation chassis running over the 2260m-radius plane curve track were calculated on the condition of 250km/h curving speed. Numerical results show that the maximum elastic deformation appears on the medium position of the transition curve,where the torsion rate of the curve track reaches its maximum. The maximum torsion angle of the levitation chassis is almost 0.125° while the C-shaped arm has the maximum vertical deformation,0.44mm. The elastic deformation mainly reflects on the transition curve,and approximates to a small constant value on the circular curve. The torsion direction of the levitation chassis on the front transition curve is contrary to that on the rear one. Dynamic responses of the elastic levitation chassis accord with the curve negotiation theory,wh Using the Solidworks,ANSYS and SIMPACK software,a complete rigid-elastic dynamic model of high-speed maglev vehicle system was set up,including the vehicle,the controller and the elastic levitation chassis. Dynamic responses of the elastic levitation chassis running over the 2260m-radius plane curve track were calculated on the condition of 250km/h curving speed. Numerical results show that the maximum elastic deformation appears on the medium position of the transition curve,where the torsion rate of the curve track reaches its maximum. The maximum torsion angle of the levitation chassis is almost 0.125° while the C-shaped arm has the maximum vertical deformation,0.44mm. The elastic deformation mainly reflects on the transition curve,and approximates to a small constant value on the circular curve. The torsion direction of the levitation chassis on the front transition curve is contrary to that on the rear one. Dynamic responses of the elastic levitation chassis accord with the curve negotiation theory,whi
分 类 号:U237[交通运输工程—道路与铁道工程] U292.917
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.200