检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:景争[1,2] 汪韬[1] 阮驰[1] 杨宏春[3] 王警卫[1,2] 吴雷学[1,2]
机构地区:[1]中国科学院西安光学精密机械研究所瞬态光学与光子技术国家重点实验室,西安710119 [2]中国科学院研究生院,北京100049 [3]电子科技大学,成都610054
出 处:《光子学报》2008年第12期2383-2386,共4页Acta Photonica Sinica
基 金:国家863高技术研究发展计划(2005A000200);西部之光(2005ZD01);西安应用材料创新基金(XA-AM-200613)资助
摘 要:针对光导开关阵列和光纤分束耦合的实际应用环境,提出一种新的实验方案,用于测试当触发光源相对于开关光敏面为点光源时入射位置对输出脉冲的影响.实验证明,不同的入射位置对开关输出脉冲有很大的影响.在入射光从负极向正极扫描过程中输出脉冲逐渐增强,在正极附近输出达到峰值,但在电极边缘处有所减弱.分析表明,这一现象和开关体内电场的分布有密切联系.Aim at the application circumstance of coupling PCSS array with a bunch of fibers, a new experiment plane for testing the influence of laser trigger position to the performance of PCSS was proposed. The results showed that the output impulse was changed a lot by the different trigger position. It increased when the trigger point moved from the cathode to the anode. The impulse reaches its peak value when the laser near the anode but decreased when the trigger come to the edge of anode. The results were analyzed and an explanation based on theory of semiconductor and distribution of the electronic field inside was given.
关 键 词:光导开关 GAAS 触发位置 半导体体内电场分布
分 类 号:TN6[电子电信—电路与系统]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.81