利用改进的EMD和随机减量法识别模态参数  

Identification of Modal Parameters Using Improved EMD and Random Decrement Method

作　　者：彭程[1] 张立民[1] 李原辉[1] 邱飞力[1] 

机构地区：[1]西南交通大学牵引动力国家重点实验室,成都610031

出　　处：《噪声与振动控制》2011年第6期53-56,共4页Noise and Vibration Control

基　　金：国家科技支撑计划项目(2009BAGl2A04-C03)

摘　　要：对振动信号进行小波去噪,克服环境噪声的干扰,提高EMD的质量,利用相关系数去除虚伪分量,然后利用随机减量法和ITD法识别出列车地板的固有频率和阻尼比。将此方法识别结果与LMS商业软件识别结果进行对比,频率相对误差不超过6%,阻尼比相对误差不超过7%。由此说明该方法具有较高的识别精度。In order to overcome the interference of environmental noise and improve the quality of EMD, the wavelet method is used to eliminate the noise signal. The correlation coefficients are applied to remove the pseudo components. And then, the random decrement method and ITD method are used to identify the natural frequency and damping ratio of train＇ s floor. Compared the identification results with those from LMS commercial software, it is found that the relative error of frequency is less than 5%, the relative error of damping ratio is less than 7%. This shows that the method has high precision of identification.

关 键 词：振动与波 模态参数识别 小波 EMD 随机减量法 ITD 

分 类 号：U260.143[机械工程—车辆工程]