硅通孔铜互连甲基磺酸铜电镀液中氯离子的作用  被引量:1

Effect of chloride ion on through-silicon via filling in methanesulfonic acid copper plating bath

在线阅读下载全文

作  者:季春花[1] 凌惠琴[1] 曹海勇[1] 李明[1] 毛大立[1] 

机构地区:[1]上海交通大学材料科学与工程学院,上海200240

出  处:《电镀与涂饰》2012年第2期6-9,共4页Electroplating & Finishing

基  金:国家自然科学基金项目(青年基金)"TSV硅通孔甲基磺酸镀铜高速填充机理研究"(61006072)

摘  要:研究了硅通孔(TSV)镀铜用甲基磺酸铜高速镀液(由Cu(CH3SO3)240g/L、甲基磺酸60g/L及Cl-50mg/L组成)中氯离子的作用机理。采用旋转圆盘电极研究了不同扩散条件下Cl-的作用效果,并采用电化学阻抗谱(EIS)和电子顺磁共振(EPR)探讨了Cl-在铜电化学沉积中的影响机制和对Cu+配位场的影响。结果表明:在深孔内扩散控制条件下,Cl-对铜沉积有明显的加速作用;在表面非扩散控制区域,尤其是高电流密度区,Cl-具有一定的抑制效果。因此,Cl-的存在有利于改善TSV深孔镀铜填充效果,提高填充速率。The effect of chloride ion on via filling by high- speed plating in a methanesulfonic acid (MSA) bath composed of Cu(CH3SO3)2 40 g/L, MSA 60 g/L, and Cl-50 mg/L for TSV (through-silicon via) copper interconnection was studied. The influence of chloride ion under different forced convection conditions was discussed using rotating disk electrode. The reaction mechanism of chloride ion during copper electrodeposition and coordination field of copper(I) ion in presence of chloride ion were characterized by electrochemical impedance spectroscopy (EIS) and electron paramagnetic resonance (EPR) analysis, respectively. The results indicated that in the bottom of via where the copper electrodeposition is diffusion-controlled, chloride ion accelerates deposition; while at the top of via where the copper electro- deposition is non-diffusion-controlled, especially at high current density area, chloride ion inhibits deposition. The existence of chloride ion enhances the TSV filling effect and velocity.

关 键 词:硅通孔 铜互连 电镀 氯离子 甲基磺酸盐 

分 类 号:TQ153.14[化学工程—电化学工业]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象