基于厚度剪切振动的压电圆盘微陀螺的制作和分析  

Fabrication and analysis of piezoelectric disk micro gyroscope based on thickness-shear vibration

在线阅读下载全文

作  者:关冉[1] 张卫平[1] 许仲兴[1] 张弓[1] 成宇翔[1] 陈文元[1] 

机构地区:[1]上海交通大学微纳科学技术研究院微米/纳米加工技术重点实验室,上海200240

出  处:《传感器与微系统》2013年第9期115-117,121,共4页Transducer and Microsystem Technologies

基  金:教育部新世纪优秀人才支持计划资助项目(NCET-10-0593);微米/纳米加工技术重点实验室基金资助项目(9140C790405110C7904);上海交通大学研究生创新基金资助项目(Z-340-014)

摘  要:基于面内振动模态工作的圆盘陀螺在利用压电方式驱动和检测时,需要在圆盘振动体侧壁上加工压电换能器,很难由MEMS工艺实现。为实现压电圆盘陀螺的小型化,设计制作了一种直接由压电材料作为振动体,基于厚度剪切振动模态工作的新型压电圆盘微陀螺。厚度剪切振动模态使得陀螺可以通过在压电基片上下表面制作金属电极的MEMS工艺进行加工。通过对加工出的陀螺器件进行阻抗分析发现加工出的陀螺具有良好的对称性,基于阻抗分析得到的品质因数通过有限元分析可知,陀螺可实现高灵敏度、低非线性度、大量程、低角速度耦合误差等性能。Because difficulties of piezoelectric transducer fabricating on the sidewall of the disk resonator,the piezoelectric disk gyroscopes based on in-plane vibration modes can hardly be fabricated with MEMS technology.To achieve miniaturization of piezoelectric disc gyroscope,a novel piezoelectric disk micro gyroscope with piezoelectric vibration body and based on thickness-shear vibration mode is designed and fabricated.The thickness-shear vibration modes make it easy to fabricate the sensor with MEMS technology by fabricating metal electrodes on the top and bottom surface of the piezoelectric wafer.The fabricated gyroscope is found to have good symmetry by impendence analysis.Based on finite element analysis on quality factor obtained by impendence analysis,the simulation results show that the gyroscope can achieve characteristics such as high sensitivity,low nonlinearity,large range and low angular rate coupling error.

关 键 词:压电 圆盘谐振体 微机械陀螺 厚度剪切振动 MEMS工艺 

分 类 号:TN389[电子电信—物理电子学] TH712[机械工程—测试计量技术及仪器]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象