掘进机行走部驱动轮动力学仿真分析  

Simulation and Analysis of Roadheader Walking Ministry Drive Wheel

作　　者：苏举栋[1] 王义亮[1] 杨兆建[1] 

机构地区：[1]太原理工大学机械工程学院,太原030024

出　　处：《煤矿机械》2013年第9期80-82,共3页Coal Mine Machinery

基　　金：山西省科学技术发展计划项目(20110321005-04);山西省科技重大专项项目(20111101040);山西省青年科技研究基金项目资助(2012021022-6)

摘　　要：掘进机行走部驱动轮的性能对掘进机的工作特性有重大影响,运用UG完成某型号掘进机行走部的建模,把模型导入动力学仿真软件recurdyn中,仿真得出掘进机水平路面行驶时驱动轮质心的运动曲线,并得出驱动轮各啮合齿面的受力分布规律。The performance of roadheader walking ministry have a significant impact on the operating characteristics of the roadheader, In this paper,The roadheader＇s walking ministry is modeled by UG, then the model is imported to recurdyn. Finally, we obtain the centroid motion curve of roadheader＇ s drive wheel on level ground and distribution law of the drive wheels＇ tooth surface.

关 键 词：掘进机 UG RECURDYN 履带 仿真 

分 类 号：TD421.5[矿业工程—矿山机电]