基于Windows平台的开放式并联机床数控系统  

Open architecture's NC system of 5-DOF parallel machines

作　　者：杨玲[1] 陈文家[1] 房立金[1] 赵明扬[1] 

机构地区：[1]中国科学院沈阳自动化研究所机器人学开放实验室,辽宁沈阳110016

出　　处：《制造业自动化》2002年第1期15-17,55,共4页Manufacturing Automation

摘　　要：以5坐标并联机床为依托,面向不同构型并联机床,采用“PMAC+IPC”双CPU为硬件平台、VisualC++6.0为软件平台,开发了基于Windows操作平台的开放式并联机床数控系统。本文介绍了本数控系统的硬件结构、软件构成,并对数控软件开发的关键技术进行了阐述。Facing parallel machines of different conformation, a numeric control (NC) system of open architecture based on Windows operating system has been developed which first is applied in 5-DOF parallel machines. It uses PMAC and IPC as hardware platform and Visual C++6.0 as software platform This paper introduces the NC system's structure and sets forth key techniques of developing NC software.

关 键 词：WINDOWS 开放式 并联机床 数控系统 

分 类 号：TG659[金属学及工艺—金属切削加工及机床]