检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]同济大学土木工程学院,上海200092 [2]同济大学岩土及地下工程教育部重点实验室,上海200092
出 处:《同济大学学报(自然科学版)》2015年第2期213-220,共8页Journal of Tongji University:Natural Science
基 金:国家自然科学基金(51078292;1378389)
摘 要:在考虑松动土体内的三维土拱效应和开挖土体与刀盘摩擦力的基础上,改进了传统的筒仓楔形体模型计算方法.结果表明:最小土压应力并不是传统方法假设的均匀分布形式,而是近似呈抛物线分布;土的黏聚力、内摩擦角、刀盘与松动土体间的摩擦角以及埋深等物理参数对其最小土压应力均有一定程度的影响;降低刀盘与开挖面土体间的摩擦角可以显著增加开挖面的极限稳定性.通过与模型试验结果和其他计算方法的对比分析,验证了本文计算方法的合理性.The minimal earth pressure on the shield tunnel face can be calculated using a new method proposed in this paper.This method takes into account the arching effect in loosening soil and the friction between cutter and soil.It is found that the distribution of the minimal earth pressure is not uniform,which is assumed by the existing methods,but parabolic.The parameters,including soil cohesion,soil friction angle,the friction angle between cutter and soil and the cover-to-diameter ratio,have significant influence on the minimal earth pressure.The stability of workface can be enhanced by decreasing the friction angle between cutter and soil.Finally,the results of the proposed method agree quite well with those reported in other literatures based on the existing methods.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.175