LCP基RF MEMS开关的工艺研究  被引量:1

Processing Study on LCP RF MEMS Switch

在线阅读下载全文

作  者:党元兰[1] 赵飞[1] 韩磊[2] 徐亚新[1] 梁广华[1] 刘晓兰[1,3] 陈雨[1,3] 庄治学 

机构地区:[1]中国电子科技集团公司第54研究所,石家庄050081 [2]东南大学MEMS教育部重点实验室,南京210096 [3]河北诺亚人力资源开发有限公司,石家庄050035

出  处:《电子与封装》2016年第5期43-47,共5页Electronics & Packaging

摘  要:在柔性LCP基板上制备RF MEMS开关,加工难度较大,影响开关质量的因素较多。主要研究影响LCP基RF MEMS开关加工质量的主要因素,寻找工艺过程控制解决方案。通过对关键工序的试验,对加工过程中的基板清洗、LCP基板覆铜面镀涂及整平、LCP基板无铜面溅射金属膜层、LCP基板平整度保持、二氧化硅膜层生长及图形化、牺牲层加工、薄膜微桥加工、牺牲层释放等工序进行了参数优化。研制的LCP基RF MEMS开关样件频率≤20 GHz、插入损耗≤0.5 d B,回波损耗≤-20 d B,隔离度≥20 d B,驱动电压30~50 V。该加工方法对柔性基板上可动结构的制造具有一定的借鉴价值。Due to the multi influences on quality of RF MEMS switch, it is difficult to fabricate the switch on flexible LCP substrate. Here, we present for the study on the key influence on LCP RF MEMS fabrication to find the processing solution. According to the experiment, the parameters of substrate cleaning, electro-plating and leveling on Cu lamination layer, metal film on LCP substrate without copper, flatness maintain during lithography, Si O2 film growing and patterning,fabrication of scarified layer forming, fabrication of thin film bridge and releasing of scarified layer were optimized. LCP RF MEMS switch with frequency less than 20 GHz was fabricated, whose insertion loss is no more than 0.5 d B, return loss is no more than-20 d B, isolation is no less than 20 d B, and driving voltage is 30 V to 50 V. The method mentioned here may have successful experiences on fabrication of moving parts on flexible substrate.

关 键 词:LCP基材 柔性 桥式RF MEMS开关 薄膜微桥 

分 类 号:TN305[电子电信—物理电子学]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象