检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李旭娟[1] 缪炳荣[1] 李国芳[2] 史艳民 LI Xujuan;MIAO Bingrong;LI Guofang;SHI Yanmin(State Key Laboratory of Traction Power,Southwest Jiaotong University,Chengdu 610031,China;College of Mechanical and Electrical Engineering,Lanzhou Jiaotong University,Lanzhou 730070,China)
机构地区:[1]西南交通大学牵引动力国家重点实验室,四川成都610031 [2]兰州交通大学机电工程学院,甘肃兰州730070
出 处:《机械制造与自动化》2018年第1期93-96,共4页Machine Building & Automation
基 金:国家自然科学基金项目(51375405)
摘 要:研究了基于系统动态响应来识别结构输入力的求解方法。分析实例悬臂梁结构的结构动力学方程以及物理数学方程,通过MATLAB仿真算例进行特征值求解,模态响应以及动态响应研究,对比有限元分析获得结构的响应结果;利用系统动态响应进行傅里叶变换和傅里叶逆变换得到输入力的时域形式,对获得的载荷结果进行识别算法分析,并且对比结构的输入力载荷。识别结果表明,这种方法对于正弦波输入力具有良好的识别效果,误差达到0.09%,能为二维结构,甚至三维结构载荷识别提供参考。This paper researches on the solution method to identify the input force based on the system dynamic response,analyzes the structural dynamic equation of cantilever structure and mathematical physics equation,solve the eigenvalues and studies the modal response and dynamic response by the MATLAB simulation examples to obtain the structural response results of finite element analysis.The Fourier transform and the inverse Fourier transform for the system dynamic response is used to obtain the input force in the time domain from.The obtained identification results are analyzed by the algorithm,and the structural input load is compared with.The results of identification show that this method has good identification effect for the sinusoidal input force.The error rate is 0.09%only.The reference is provided for the load identification for 2D and 3D structures.
分 类 号:TH113[机械工程—机械设计及理论]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15